Simple steps to quickly find IP address in CMD

Published on July 16, 2023

Cmd is a powerful tool that allows you to execute commands directly in the Windows operating system. One of the most common tasks you might need to perform is finding your IP address. Your IP address is a unique identifier that is assigned to your device when it connects to a network. It is crucial for various networking operations, such as troubleshooting connection issues or configuring network settings.

In this article, we will show you how to find your IP address in Command Prompt. The process is simple and only requires a few steps.

To find your IP address, open Command Prompt by pressing the Windows key + R, typing "cmd", and pressing Enter. Once the Command Prompt window opens, type the command "ipconfig" and press Enter. This will display a list of network connections and their corresponding IP addresses.

Open Command Prompt

In order to find the IP address in Command Prompt, you will first need to open the Command Prompt window. The Command Prompt is a command line interface that allows you to interact with your computer using text commands. Here is how you can open the Command Prompt:

  1. Click on the "Start" button in the bottom left corner of your screen
  2. In the search bar, type "cmd" and press Enter
  3. The Command Prompt window will open and you will be able to enter commands

Once you have opened the Command Prompt, you can proceed to find the IP address using the appropriate command.

Enter ipconfig Command

In order to find your IP address using the Command Prompt, you need to enter the ipconfig command. This command is specifically designed to display the IP configuration settings for all network adapters on your computer.

To enter the ipconfig command, follow these steps:

1. Open the Command Prompt by pressing the Windows key + R, typing cmd, and then pressing Enter.
2. Type ipconfig in the Command Prompt and press Enter.
3. The Command Prompt will display a list of network adapters along with their IP addresses and other network configuration information.

By entering the ipconfig command, you can quickly and easily find the IP address assigned to your computer. This information can be useful for troubleshooting network issues or configuring network settings.

Locate the Ethernet Adapter Section

When trying to find your IP address in Command Prompt, you'll need to locate the Ethernet Adapter section. This section contains the necessary information to determine your IP address.

To find the Ethernet Adapter section, follow these steps:

Step 1: Open Command Prompt

To open Command Prompt, press the "Windows Key" + "R" on your keyboard. This will open the Run dialog box. Type "cmd" in the text field and click "OK" or press "Enter".

Step 2: Run the IPConfig Command

Once Command Prompt is open, type "ipconfig" and press "Enter". This command will display all the network interfaces and their respective configurations.

Scroll through the output until you locate the section that starts with "Ethernet adapter". This section typically contains your network adapter's name and configuration details.

Look for the line that starts with "IPv4 Address" or "IP Address". The set of numbers following this line is your IP address.

That's it! You've successfully located the Ethernet Adapter section and found your IP address using Command Prompt.

Remember that the IP address displayed may vary depending on your network configuration and connection type. If you're connected to a wireless network, you may need to look for the "Wireless adapter" section instead.

Find the IPv4 Address

To find the IPv4 address of a device using the Command Prompt (cmd) in Windows operating systems, follow these steps:

Step 1: Open Command Prompt

Press the Windows key + R to open the Run dialog box. Type "cmd" and hit Enter to open the Command Prompt.

Step 2: Enter the Command

In the Command Prompt window, type "ipconfig" and press Enter. This command will display the IP configuration for all network interfaces on your device.

Note: If you are connected to multiple networks (such as Ethernet and Wi-Fi), you will see multiple entries. Look for the one that corresponds to your active network connection.

Step 3: Find the IPv4 Address

In the list of IP configurations, look for the line that starts with "IPv4 Address". The value next to it is your device's IPv4 address.

For example, if the line shows "IPv4 Address: 192.168.0.100", then your IPv4 address is 192.168.0.100.

Note: If there is no IPv4 address listed, it could mean that your device is not currently connected to a network, or there may be a network issue.

By following these steps, you can easily find the IPv4 address of your Windows device using the Command Prompt (cmd).

Identify the Default Gateway

To find your default gateway IP address using Command Prompt:

  1. Open the Command Prompt by pressing the Windows key + R, typing "cmd", and pressing Enter.
  2. In the Command Prompt window, type the command "ipconfig" and press Enter.
  3. Scroll through the information displayed until you find the "Default Gateway" entry.
  4. The IP address next to the "Default Gateway" entry is your default gateway IP address.

Note: The default gateway IP address is the IP address of the router or modem on your network that connects you to the internet.

Now you know how to find your default gateway IP address using Command Prompt.

Look for the Subnet Mask

Once you have found the IP address using the command prompt, you can also find the subnet mask. The subnet mask is used to determine the network portion of an IP address. To find the subnet mask using the command prompt, follow these steps:

Step 1:

Open the command prompt by pressing the Windows key + R, typing cmd, and pressing Enter.

Step 2:

In the command prompt window, type ipconfig and press Enter.

This will display the network information for all your network adapters.

Step 3:

Look for the network adapter that you are currently using, and find the corresponding IPv4 Address.

Next to the IPv4 Address, you will see the Subnet Mask. It is typically represented as a series of four numbers separated by periods, such as 255.255.255.0.

Once you have found the subnet mask, you can use it to determine the network portion of an IP address.

View the DNS Servers

When troubleshooting network issues or configuring your network settings, it is often useful to view the DNS (Domain Name System) servers that your computer is using. DNS servers are responsible for translating domain names, such as www.example.com, into IP addresses that computers can understand.

To view the DNS servers in Command Prompt, follow these steps:

  1. Open Command Prompt by pressing the Windows Key + R and then typing "cmd" in the Run dialog box.
  2. In the Command Prompt window, type "ipconfig /all" and press Enter.
  3. Scroll through the output until you find the section labeled "DNS Servers."

The IP addresses listed under the "DNS Servers" section are the DNS servers that your computer is currently using. These addresses represent the servers that your computer sends DNS requests to when resolving domain names.

Check for DHCP Enabled

If you want to find the IP address using the Command Prompt, it is important to check whether DHCP (Dynamic Host Configuration Protocol) is enabled on your device. DHCP is a networking protocol that assigns IP addresses automatically to devices on a network.

To check if DHCP is enabled, you can follow these steps:

  1. Open the Command Prompt by typing cmd in the search bar and selecting the Command Prompt app.
  2. Once the Command Prompt window is open, type the following command:
  3. ipconfig /all
  4. Press Enter.

This command will display detailed information about your network connections, including the DHCP status.

Look for "DHCP Enabled"

In the output, you will see a list of network adapters and their configurations. Look for the adapter that you are currently using for your network connection.

Under the adapter settings, find the line that says "DHCP Enabled." If it says "Yes," then DHCP is enabled, and your IP address is being assigned automatically.

If "DHCP Enabled" is mentioned as "No" or it is not listed, then DHCP is not enabled, and you might have configured a static IP address manually.

It is important to note that if DHCP is enabled, your IP address may change dynamically when you reconnect to the network. This means that it will not remain the same every time you connect.

By checking the DHCP status, you can determine whether your IP address is assigned automatically or manually configured, which is useful when troubleshooting network connectivity issues.

Access Advanced Network Information

If you want to find more advanced network information using the Command Prompt, there are several commands you can use.

The ipconfig command is one of the most useful commands. By typing ipconfig /all in the Command Prompt, you can access detailed information about your network connections. This includes the IP address, subnet mask, default gateway, and DNS servers.

Another useful command is nslookup. By typing nslookup www.example.com, you can find the IP address associated with a particular domain name. This can be helpful for troubleshooting network connectivity issues or verifying DNS configurations.

The netstat command provides information about active network connections and listening ports on your computer. By typing netstat -a, you can see all active connections and listening ports, along with their IP addresses and other details.

By using these and other Command Prompt commands, you can obtain advanced network information that can help you diagnose and troubleshoot network issues.

Check for Network Connection Issues

In order to find your IP address using the Command Prompt, it is important to make sure that you have a stable network connection. Any issues with your network connection can prevent you from obtaining the correct IP address.

To check for network connection issues, you can use the following command in the Command Prompt:

Command Description
ping www.google.com Pings the Google website to check if you have a working internet connection.
ipconfig Displays information about your network adapters, including your IP address, subnet mask, and default gateway.
tracert www.google.com Traces the route that packets take from your computer to the Google website, helping you identify any network connection problems along the way.

By running these commands, you can determine if there are any issues with your network connection that may be affecting your ability to find your IP address using the Command Prompt.

Use the Ping Command

To find your IP address using the Ping command, follow these steps:

  1. Open the Command Prompt by pressing the Windows key + R, typing "cmd", and pressing Enter.
  2. In the Command Prompt window, type "ping" followed by a space and the domain name or IP address you want to ping.
  3. Press Enter.
  4. The Command Prompt will display the ping results, which include the IP address.
  5. Look for the line that starts with "Reply from" or "Destination host unreachable".
  6. The IP address will be displayed within square brackets [] after the "Reply from" or "Destination host unreachable" message.

By using the Ping command, you can quickly and easily find your IP address in the Command Prompt.

Determine the IP Address from a Website

In the Command Prompt, you can find the IP address of a specific website by using the following steps:

  1. Open the Command Prompt by typing "cmd" in the search bar and clicking on the Command Prompt app.
  2. Type in "nslookup www.website.com" and press Enter.
  3. The IP address of the website will be displayed next to the "Address" section.

This method allows you to easily determine the IP address of any website, which can be useful for troubleshooting network issues or accessing specific resources on the internet.

Retrieve MAC Address

To find the MAC address of a device using the command prompt, follow these steps:

  1. Open the command prompt on your computer by typing "cmd" in the Windows search bar and selecting the "Command Prompt" app.
  2. In the command prompt window, type "ipconfig /all" and press Enter.
  3. A list of network information will appear. Look for the "Physical Address" or "MAC Address" section.
  4. The MAC address will be displayed next to the appropriate network adapter. It is usually a combination of six alphanumeric characters separated by colons or hyphens.

The MAC address is a unique identifier assigned to each network interface card (NIC) or network adapter. It is used for communication on a local network and cannot be changed. Knowing the MAC address can be helpful in troubleshooting network connectivity issues or configuring network settings.

Get IP Address of Specific Domain

If you are wondering how to find the IP address of a specific domain using command prompt, you are in the right place. In this guide, we will walk you through the steps to obtain the IP address of a domain using the command prompt (CMD) on your Windows computer.

Step 1: Open Command Prompt

To begin the process, open the Command Prompt by searching for "cmd" in the Windows Start Menu or by pressing the "Windows Key + R" to open the Run dialog box, then type "cmd" and press Enter.

Step 2: Use the "nslookup" Command

Once the Command Prompt is open, type the following command and press Enter:

nslookup [domain]

Replace [domain] with the actual domain name for which you want to find the IP address. For example, if you want to find the IP address of google.com, your command should be:

nslookup google.com

Step 3: View the IP Address

After executing the nslookup command, you will see the IP address of the specific domain listed under the "Address" section. The IP address will be a series of numbers and periods.

Using the command prompt to find the IP address of a specific domain is a quick and easy way to obtain this information. It can be helpful for troubleshooting network issues, checking DNS configurations, or simply finding out the IP address of a website. Now you know how to find the IP address of a specific domain using the command prompt!

Find IP Address of Another Computer on the Same Network

If you are connected to a network and want to find the IP address of another computer on the same network, you can use the Command Prompt (cmd) utility in Windows. This method allows you to quickly retrieve the IP address information of any computer connected to the same network as yours.

To find the IP address of another computer, follow these steps:

  1. Open the Command Prompt by pressing the Windows key + R and typing "cmd". Press Enter.
  2. In the Command Prompt window, type the command "ipconfig" and press Enter.
  3. A list of network connections and their corresponding IP addresses will be displayed.
  4. Identify the network connection that the other computer is using. It will typically have a name like "Local Area Connection" or "Wireless Network Connection".
  5. Look for the IP address next to the network connection name. This is the IP address of the other computer on the same network.

Once you have retrieved the IP address of the other computer, you can use it to establish a connection or access shared resources on that computer, if you have the necessary permissions.

It's important to note that this method will only work if both computers are connected to the same network. If the other computer is not on the same network, you will need to use other methods, such as a port scanning tool or a network mapping tool, to find its IP address.

Using the Command Prompt to find the IP address of another computer on the same network is a simple and straightforward method that can be useful in various scenarios, such as troubleshooting network connectivity issues or accessing shared resources.

Trace the Route to a Destination

Using the Command Prompt in Windows, you can trace the route that packets of data take to a specific destination IP address. This can be useful for troubleshooting network connectivity issues or for determining the path that your network traffic is taking.

To trace the route to a destination IP address, open the Command Prompt by typing cmd in the Windows search bar and pressing Enter. Once the Command Prompt window opens, type tracert [destination IP address] and press Enter.

The tracert command will send a series of packets from your computer to the destination IP address, and each router along the way will send back an ICMP (Internet Control Message Protocol) Time Exceeded message. This process will continue until the packets reach the destination or until a maximum number of hops is reached.

Interpreting the Results

Once the trace route is complete, you will see a list of the routers or hops that the packets passed through, along with their IP addresses. The first hop will be your local router or gateway, and the last hop will be the destination IP address.

Each hop in the list will show the time it took for the packets to reach that hop, in milliseconds. This can help identify any delays or bottlenecks in the network path.

Additionally, each hop will display the hostname and IP address of the router. In some cases, you may see IP addresses displayed instead of hostnames if the routers do not have reverse DNS configured.

Using Traceroute on Other Operating Systems

While the tracert command works on Windows, the command varies on other operating systems. On macOS, you can use the traceroute command in the Terminal. On Linux, the traceroute command is also used in the Terminal.

By tracing the route to a destination IP address, you can gain insights into the path your network traffic is taking and identify any potential issues along the way.

Obtain IP Address from Email Header

To find the IP address in an email header, you can use the Command Prompt (CMD) in Windows. By accessing the email's header information, you can locate the IP address from which the email was sent.

Follow these steps to obtain the IP address from an email header:

  1. Open the email in your email client or web browser.
  2. Find the option to view the email's header information. In most email clients, this can be done by clicking on an option like "View Full Header" or "Show Original."
  3. Once you have accessed the email's header information, look for the "Received" field. This field usually contains the IP address of the sender.
  4. Identify the IP address listed in the "Received" field. This IP address is the most recent one from which the email was sent.
  5. Copy the IP address and use it for any necessary purposes, such as tracking the location of the sender or reporting spam.

By following these steps, you can easily obtain the IP address from an email header using the Command Prompt (CMD) in Windows. This information can be useful for various reasons, including identifying the sender's location or reporting any suspicious or harmful emails.

Find IP Address of a Printer

In order to connect your printer to your network or troubleshoot any connectivity issues, you may need to find its IP address. By knowing the IP address of your printer, you can easily configure it or add it to your devices wirelessly.

Here's how you can find the IP address of a printer using the Command Prompt:

  1. Press the Windows key + R to open the Run dialog box.
  2. Type "cmd" and press Enter to open the Command Prompt.
  3. In the Command Prompt window, type "ipconfig" and press Enter.
  4. Scroll through the list of results and look for the section that corresponds to your printer's connection. It may be listed as "Wireless LAN adapter" or "Ethernet adapter," depending on the type of printer connection.
  5. Under the printer's connection section, locate the "IPv4 Address" or "Default Gateway" entry. This will display the IP address of your printer.

Once you have found the IP address, you can use it to configure the printer settings or add the printer to your devices. Make sure that your printer is connected to the same network as your computer in order to communicate properly.

In conclusion, using the Command Prompt is an easy way to find the IP address of a printer. By following these simple steps, you can quickly locate the IP address and easily manage your printer's settings.

Discover IP Cameras on Local Network

In this tutorial, we will learn how to discover IP cameras on the local network using the command prompt. IP cameras are widely used for surveillance purposes, and knowing the IP addresses of these cameras can be essential for accessing their video feeds.

Step 1: Open Command Prompt

To get started, open the command prompt. You can do this by pressing the Windows key + R, typing "cmd" in the Run dialog box, and pressing Enter.

Step 2: Use the "arp" Command

Next, we will use the "arp" command to find the IP addresses of devices connected to the local network. In the command prompt window, type the following command:

arp -a

This command will display a list of all the devices that are currently connected to your local network along with their corresponding IP addresses.

Step 3: Identify the IP Cameras

Now, look for the entries in the list that correspond to IP cameras. Typically, these entries will include the manufacturer name or model number of the camera. Once you have identified the IP address of the camera, you can use a web browser to access its video feed by entering the IP address in the address bar.

Alternatively, you can use specialized software or smartphone apps to view the video feed from the IP cameras on your local network.

By following these steps, you can easily discover the IP addresses of IP cameras on your local network using the command prompt. This can be useful for accessing and monitoring the video feeds from these cameras for security or surveillance purposes.

Check IP Address Conflict

In order to find out if there is an IP address conflict on your network, you can use the Command Prompt. An IP address conflict occurs when two devices on the same network are assigned the same IP address, which can cause connectivity issues.

To check for IP address conflicts, follow these steps:

  1. Open the Command Prompt by pressing Windows Key + R, typing cmd, and pressing Enter.
  2. In the Command Prompt window, type ipconfig and press Enter.
  3. Look for the line that says "IPv4 Address" and note down the IP address.
  4. Next, type arp -a and press Enter to view the ARP table.
  5. Look for any IP addresses that match the one you noted down earlier.
  6. If you find any duplicate IP addresses, it means there is an IP address conflict. You will need to reassign IP addresses to the affected devices to resolve the conflict.

By following these steps, you can easily check for IP address conflicts using the Command Prompt. Resolving any conflicts will help ensure smooth network connectivity.

Access Devices in a Different Subnet

If you need to access devices in a different subnet, you can use the IP address and the Command Prompt to find and connect to them. Here's how:

Step 1: Find your IP address

To start, you need to find your own IP address. Open the Command Prompt by searching for "cmd" in the Start menu.

In the Command Prompt, type ipconfig and press Enter. Look for the "IPv4 Address" under the Ethernet adapter or Wireless LAN adapter section. This is your IP address.

Step 2: Find the IP address of the device in the different subnet

You also need to find the IP address of the device you want to access in the different subnet. If you know the device's hostname, you can use the ping command followed by the hostname to get its IP address. For example: ping devicehostname

If you don't know the device's hostname, you can try using a network scanning tool or asking the network administrator for assistance.

Note: Make sure the device you want to access has a valid IP address and is turned on.

Step 3: Connect to the device using the IP address

Now that you have the IP address of both your own device and the device in the different subnet, you can use it to establish a connection.

In the Command Prompt, type ping ipaddress, replacing ipaddress with the IP address of the device you want to access. Press Enter.

If the ping is successful and you get a response, it means you have successfully established a connection with the device in the different subnet.

By following these steps, you can find and access devices in a different IP subnet using the Command Prompt. Remember to obtain the necessary permissions and consult with the network administrator if you are unsure about the network setup.

Reset IP Address

If you are experiencing network issues or suspect that your IP address may be causing problems, you can reset your IP address using the command prompt (cmd). Resetting your IP address can help resolve connection issues and allow your device to obtain a new IP address.

To reset your IP address in command prompt, follow these steps:

  1. Open the command prompt by pressing the Windows key + R, typing "cmd" in the Run dialog box, and pressing Enter.
  2. In the command prompt window, type "ipconfig /release" and press Enter. This command will release your current IP address.
  3. Type "ipconfig /renew" and press Enter. This command will request a new IP address from your router or DHCP server.
  4. Wait for the command to complete and check if you have successfully obtained a new IP address.

Note: Resetting your IP address may temporarily disconnect you from the network. If you are connected to the internet via Wi-Fi, make sure to reconnect to your network after resetting the IP address.

If you are still experiencing network issues after resetting your IP address, you may need to troubleshoot your network or contact your Internet Service Provider (ISP) for further assistance.

Change IP Address

If you need to change your IP address, you can do so using command prompt (cmd) in Windows. With command prompt, you have full control over your network settings and can easily modify your IP address.

To change your IP address using command prompt, follow these steps:

  1. Open command prompt by pressing the Windows key + R, then type "cmd" and press Enter.
  2. In the command prompt window, type "ipconfig" and press Enter. This will display your current IP address.
  3. Take note of your current IP address, as you will need it later.
  4. Type "ipconfig/release" and press Enter. This will release your current IP address.
  5. Type "ipconfig/renew" and press Enter. This will assign a new IP address to your computer.
  6. Wait for the command prompt to complete the process. Once it's done, your IP address will be changed.

Changing your IP address can be helpful in various situations, such as troubleshooting network connectivity issues or accessing geographically restricted content. Just make sure to follow these steps carefully to avoid any unwanted network configuration changes.

Configure Static IP Address

If you want to find and configure a static IP address using the command prompt (cmd) in Windows, you can follow these steps:

1. Open the command prompt by pressing the Windows key + R, then typing cmd and pressing Enter.

2. In the command prompt window, type "ipconfig" and press Enter. This will display your current IP address information.

3. Note down your IPv4 address, which is the address you will be configuring as static.

4. Next, type "netsh interface ip set address name="YOUR NETWORK ADAPTER NAME" static YOUR DESIRED IP ADDRESS SUBNET MASK DEFAULT GATEWAY" and press Enter.

5. Replace "YOUR NETWORK ADAPTER NAME" with the name of your network adapter, which you can find by typing "netsh interface ip show config" and pressing Enter.

6. Replace "YOUR DESIRED IP ADDRESS SUBNET MASK DEFAULT GATEWAY" with the specific values you want to set for your static IP address, subnet mask, and default gateway.

7. Press Enter to execute the command and set the static IP address.

After these steps, your network adapter should be configured with the static IP address you specified. Make sure to test your network connection to ensure it is working properly.

Use Proxy Server

When trying to find an IP address, it may be beneficial to use a proxy server. A proxy server acts as an intermediary between your device and the internet, allowing you to access websites and services through a different IP address.

To use a proxy server, follow these steps:

Step 1: Find a Proxy Server

There are various websites and services available that provide lists of proxy servers. Search for "proxy server list" and choose a reliable source.

Step 2: Configure Proxy Settings

Once you have found a proxy server, you will need to configure your device's proxy settings. This can typically be done through the network settings or internet options of your device's operating system.

Here's how to configure proxy settings on different operating systems:

  • Windows: Go to "Control Panel" > "Network and Internet" > "Internet Options" > "Connections" > "LAN Settings". Enter the proxy server IP address and port number in the designated fields.
  • Mac: Open "System Preferences" > "Network" > click on your currently active network connection > "Advanced" > "Proxies" > Configure the proxy server settings.
  • Linux: Proxy settings can vary depending on the Linux distribution. Refer to the documentation or network settings of your specific Linux distribution for instructions on configuring proxy settings.

Remember to save your settings after configuring the proxy server.

Using a proxy server can be a useful tool when trying to find an IP address or to access region-restricted websites or services. However, it is important to ensure that you choose a reliable proxy server and understand the potential risks associated with using proxies.

Assign IP Address with Netsh Command

In the previous sections, we learned how to find the IP address using the Command Prompt. Now, let's explore how to assign an IP address using the netsh command.

Step 1: Open Command Prompt

First, open the Command Prompt by pressing the Windows key + X and selecting "Command Prompt" from the menu.

Step 2: Run Netsh Command

To assign an IP address using the netsh command, use the following syntax:

  • Type netsh interface ipv4 show interfaces to display a list of available network interfaces.
  • Note down the index number of the interface you want to assign the IP address to.
  • Type netsh interface ipv4 set address name="InterfaceName" static IPAddress SubnetMask Gateway, replacing "InterfaceName" with the name of your interface, and "IPAddress", "SubnetMask", and "Gateway" with the desired values for your IP configuration.
  • Press Enter to run the command and assign the new IP address.

For example, to assign the IP address "192.168.0.100" with a subnet mask of "255.255.255.0" and a default gateway of "192.168.0.1" to an interface named "Ethernet", you would use the following command:

netsh interface ipv4 set address name="Ethernet" static 192.168.0.100 255.255.255.0 192.168.0.1

Note that you need administrative privileges to run this command.

By following these steps, you can assign a new IP address to a specific network interface using the netsh command in the Command Prompt.

Find IP Address on Mac OS

If you're using a Mac OS and need to find your IP address, you can do so using the command prompt. Here's how:

    Step 1: Open Terminal

  1. Click on the Spotlight search icon (magnifying glass) in the top-right corner of your screen.
  2. Type "Terminal" and click on the Terminal application in the search results.
  3. Step 2: Enter the Command

  4. In the Terminal window, type ifconfig and press Enter.
  5. A list of network interfaces will be displayed. Look for the interface you are currently using (e.g., Wi-Fi or Ethernet).
  6. You will find your IP address listed next to the "inet" or "inet6" label under your interface.

By following these steps, you can easily find your IP address on Mac OS using the command prompt.

Find IP Address on Linux

If you are using Linux, you can easily find your IP address using the command line. Here's how:

  1. Open your terminal by selecting the Terminal application or by pressing Ctrl + Alt + T.
  2. Type the following command and press Enter:
    ip addr show
  3. You will see the output showing all the network interfaces on your system and their associated IP addresses.
  4. Look for the line that starts with "inet" followed by the IP address. This is your IP address.

By following these steps, you can easily find your IP address on Linux using the command line.

Question-answer:

What is the command to find IP address in Command Prompt?

The command to find IP address in Command Prompt is "ipconfig".

How do I open Command Prompt?

To open Command Prompt, you can press the Windows key + R, type "cmd" and press Enter, or you can search for "Command Prompt" in the Start menu.

Is there a shortcut to find IP address in Command Prompt?

Yes, you can use the shortcut "Windows key + X" and choose "Command Prompt" or "Command Prompt (Admin)" from the menu. Then, type "ipconfig" and press Enter to find your IP address.

Can I find the IP address of a website using Command Prompt?

Yes, you can find the IP address of a website using Command Prompt. Just open Command Prompt and type "ping ", where is the URL of the website you want to find the IP address of.

Is it possible to find the IP address of a specific device on the network using Command Prompt?

Yes, it is possible to find the IP address of a specific device on the network using Command Prompt. You can use the command "arp -a" to list all the devices connected to your network along with their IP addresses.

Ads: