Step-by-Step Guide - How to Find IP Address on Windows 10

Are you trying to find the IP address on your Windows 10 computer? Knowing your IP address can be useful for various reasons, such as troubleshooting network issues or setting up a file-sharing network. Luckily, finding your IP address on Windows 10 is a simple process that can be done in just a few easy steps.

To find your IP address on Windows 10, you can follow these straightforward instructions:

Step 1: First, open the Start menu and type "Command Prompt" in the search bar. Click on the Command Prompt app that appears in the search results.

Step 2: Once the Command Prompt window opens, type in the command "ipconfig" and press Enter. This command will display a list of various network configurations, including your IP address.

Step 3: Look for the line that says "IPv4 Address." Next to it, you will see a series of numbers separated by periods. This is your IP address.

By following these easy steps, you can quickly find the IP address on your Windows 10 computer. Remember, your IP address may change from time to time, especially if you are connected to a dynamic IP network. Therefore, it's always a good idea to check your IP address whenever needed.

Knowing your IP address can come in handy in various situations, so make sure to keep these steps in mind the next time you need to find your IP address on Windows 10.

Utilizing the Command Prompt

The Command Prompt is a powerful tool in Windows 10 that allows you to interact with your computer using text-based commands. It can be used to find your IP address quickly and easily.

To find your IP address using the Command Prompt, follow these easy steps:

Step 1: Open the Command Prompt

Click on the Start menu in the bottom-left corner of your screen and type "Command Prompt" into the search bar. Then click on the Command Prompt app to open it.

Step 2: Type the Command

In the Command Prompt window, type "ipconfig" and press Enter. This command will display detailed information about your network connections.

Look for the line that says "IPv4 Address" followed by a series of numbers separated by periods. This is your IP address.

By utilizing the Command Prompt, finding your IP address on Windows 10 is a breeze. Remember to close the Command Prompt window when you are finished.

Using the Windows Network and Internet Settings

If you are using Windows 10 and need to find your IP address, you can easily do so using the built-in network and internet settings. These settings provide a simple method for accessing your network and internet information, including your IP address.

To find your IP address, follow these easy steps:

1. Click on the "Start" button located in the bottom left corner of your screen.
2. From the Start menu, select "Settings."
3. In the Settings window, click on "Network & Internet."
4. On the left side of the Network & Internet settings, click on "Ethernet" if you are connected via an Ethernet cable, or click on "Wi-Fi" if you are connected wirelessly.
5. Under the selected network type, click on "Change adapter options."
6. A new window will open, displaying all of your network connections. Right-click on the active network connection and select "Status."
7. In the Status window, click on "Details."
8. A new window will open, showing detailed information about your network connection. Look for the "IPv4 Address" field to find your IP address.
9. Your IP address will be displayed next to the "IPv4 Address" field. It will be a series of numbers separated by periods.

By following these steps, you can easily find your IP address on Windows 10 using the network and internet settings. This information can be useful for troubleshooting network issues or for setting up network connections.

Checking the Network Connection Status

When using Windows 10, it is important to regularly check the network connection status in order to troubleshoot any issues that may arise. This includes finding the IP address of your device, which plays a crucial role in connecting to the internet.

Step 1: Open the Network Settings

In order to find the IP address on Windows 10, you need to start by opening the Network Settings. You can do this by right-clicking on the network icon in the taskbar and selecting "Open Network & Internet settings".

Step 2: Access the Network Status

Once the Network Settings window is open, you will see various options on the left-hand side. Click on "Status" to access the Network Status.

Step 3: Find the IP Address

In the Network Status window, you will find detailed information about your network connection. Scroll down until you see the "Properties" section. Look for the "IPv4 address" or "IPv6 address" to find your IP address.

Note: The IPv4 address is the most commonly used. However, if your network supports IPv6, you may see an IPv6 address as well.

By following these easy steps, you can quickly find the IP address on Windows 10. This information can be helpful for troubleshooting network issues or setting up certain network configurations.

Remember to double-check the IP address when troubleshooting network issues, as it may change if your device is set to obtain IP addresses automatically.

Accessing the Network Connection Details

In order to find your IP address on Windows 10, you will need to access the network connection details. This will provide you with the necessary information to identify your IP address.

To begin, open the Network and Sharing Center on your Windows 10 computer. You can do this by right-clicking on the network icon in the taskbar and selecting "Open Network and Sharing Center".

Once the Network and Sharing Center is open, you will see a section labeled "View your active networks". Under this section, you will find the name of your currently connected network. Click on the network name to access the network connection details.

In the network connection details window, you will find various pieces of information about your network connection. Look for the "IPv4 Address" field, which will display your IP address. The IP address will be in the format "10.X.X.X".

Take note of the IP address displayed in the network connection details window, as this is your Windows 10 computer's current IP address. You can now use this IP address for various purposes, such as troubleshooting network issues or configuring network settings.

Remember, the IP address can change depending on your network configuration or if you connect to a different network. Therefore, it is always a good idea to check the network connection details whenever you need to find your IP address on Windows 10.

Locating the IP Address in the IPv4 Address Field

When trying to find the IP address on Windows 10, you can start by looking in the IPv4 Address field. This field contains the unique identifier assigned to your device on the network.

To locate the IPv4 Address field, follow these simple steps:

Step 1: Open Network & Internet Settings

Click on the Windows Start menu and select the settings gear icon. From the settings menu, choose the "Network & Internet" option.

Step 2: Select the Network Connection

Once in the Network & Internet settings, select the "Wi-Fi" or "Ethernet" option depending on your network connection type.

Step 3: View IP Address Details

In the Wi-Fi or Ethernet settings, scroll down until you see the "IP settings" section. Here, you will find the IPv4 Address field, displaying the IP address assigned to your device.

Note: The IPv4 Address may appear as a combination of numbers and dots, such as 192.168.1.1.

By following these easy steps, you can quickly locate the IP address on Windows 10 and have access to important network information for troubleshooting or configuring network settings.

Searching for the IP Address in the IPv6 Address Field

When it comes to finding the IP address on Windows, it is important to understand that there are two types of IP addresses: IPv4 and IPv6. While IPv4 addresses are more common, IPv6 addresses are also used in some cases.

If you are looking to find your IPv6 address on Windows 10, the process is quite similar to finding an IPv4 address.

Step 1: Open the Command Prompt

To start the process, open the Command Prompt by pressing the Windows key + X and selecting "Command Prompt" from the menu.

Step 2: Enter the Command

Once the Command Prompt window is open, type in the following command and press Enter:

ipconfig /all

This command will display detailed network information, including both IPv4 and IPv6 addresses.

Step 3: Locate the IPv6 Address

Scroll through the information displayed in the Command Prompt window until you find the section labeled "Ethernet adapter Ethernet" or "Wireless LAN adapter Wi-Fi" (depending on your network connection).

Look for the line that starts with "IPv6 Address" followed by a series of numbers and letters. This is your IPv6 address.

Note: If you have multiple network connections, such as an Ethernet and a Wi-Fi connection, you may see multiple IPv6 addresses. Make sure to identify the correct one for your current network connection.

Now that you have located your IPv6 address, you can use it for various purposes, such as configuring network settings or troubleshooting network issues.

Checking the Default Gateway

Another way to find your IP address on Windows 10 is by checking the default gateway. The default gateway is the IP address of the router that connects your computer to the network. Here's how you can find it:

1. Press the Windows key and type "cmd" to open the Command Prompt.
2. In the Command Prompt window, type "ipconfig" and press Enter.
3. A list of network connections will appear. Look for the one that you are currently using and find the "Default Gateway" value listed under that connection.
4. The IP address next to the "Default Gateway" is your router's IP address.

Once you have the default gateway IP address, you can enter it into a web browser to access your router's settings page. From there, you may be able to find additional information about your network connection, such as the IP address assigned to your computer.

Obtaining the IP Address via DHCP

If you are using a Windows 10 operating system, obtaining the IP address of your device can be done easily through the Dynamic Host Configuration Protocol (DHCP).

The DHCP is a network protocol that automatically assigns IP addresses to devices in a network. By default, Windows 10 is configured to use DHCP to obtain IP addresses for both wired and wireless network connections.

Steps to obtain IP address via DHCP on Windows 10:

1. Click on the "Start" button on the taskbar and select "Settings" from the menu.
2. In the Settings window, click on the "Network & Internet" option.
3. In the Network & Internet settings, select the "Status" tab from the left sidebar.
4. Under the "Change your network settings" section, click on the "Change adapter options" link.
5. A window will open, displaying all the network adapters available on your device. Right-click on the network adapter you are currently using and select "Properties" from the context menu.
6. In the Properties window, scroll down and locate the "Internet Protocol Version 4 (TCP/IPv4)" entry. Select it and click on the "Properties" button.
7. In the Internet Protocol Version 4 (TCP/IPv4) properties, make sure the "Obtain an IP address automatically" option is selected.
8. Click on the "OK" button to save the changes.

After following these steps, your Windows 10 device will automatically obtain an IP address from the DHCP server in your network. This IP address will be used to identify and communicate with your device within the network.

Using the Control Panel

If you're using a Windows 10 operating system, you can easily find your IP address by using the Control Panel. The Control Panel is a centralized hub where you can access various settings and configurations for your computer.

To access the Control Panel, follow these steps:

1. Click on the Start button located at the bottom left corner of your screen.
2. In the search bar that appears, type "Control Panel".
3. Click on the Control Panel application that appears in the search results.

Once you are in the Control Panel, follow these steps to find your IP address:

1. Click on the Network and Internet category.
2. Click on the Network and Sharing Center option.
3. Click on the active network connection under the "View your active networks" section.
4. A new window will appear with detailed information about your network connection.
5. Look for the "IPv4 Address" field, which will display your IP address.

By following these simple steps, you can easily find your IP address using the Control Panel on your Windows 10 computer.

Accessing the Network and Sharing Center

To find the IP address on your Windows 10 computer, you can access the Network and Sharing Center. This utility allows you to view and manage your network connections and settings.

1. Click on the Start menu located in the lower-left corner of your Windows 10 desktop.
2. In the search bar, type "Network and Sharing Center".
3. From the search results, click on "Network and Sharing Center".

By following these steps, you will be able to access the Network and Sharing Center on your Windows 10 system.

Viewing the Active Network Connections

To find your IP address on Windows, you can view the active network connections. This will show you the network interfaces and their IP addresses that are currently being used by your computer.

Here is a step-by-step guide to view the active network connections on Windows:

1. Open the Start menu by clicking on the Windows logo in the bottom left corner of the screen.
2. Type "Control Panel" and click on the Control Panel app from the search results.
3. In the Control Panel window, click on "Network and Internet".
4. Next, click on "Network and Sharing Center".
5. On the left side of the Network and Sharing Center window, click on "Change adapter settings".
6. A window will open showing all the active network connections. Right-click on the network connection you want to view the IP address for and select "Status".
7. In the Status window, click on the "Details" button.
8. A new window will open showing the network connection details. Look for the "IPv4 Address" field, which will display the IP address assigned to that network connection.
9. Note down the IP address displayed for future reference.

By following these simple steps, you can easily find the IP address of your Windows computer through viewing the active network connections.

Opening the Network Adapter Properties

Once you have identified the network adapter through which you want to find the IP address on Windows, you need to open the network adapter properties. The network adapter properties allow you to view and modify various settings related to the adapter, including the IP address settings.

Here are the steps to open the network adapter properties:

1. Press the Windows key + X combination on your keyboard to open the Power User menu.
2. From the menu, select Network Connections. This will open the Network Connections window.
3. In the Network Connections window, locate the network adapter you want to find the IP address for. Right-click on the adapter and select Properties from the context menu.
4. This will open the network adapter properties window. In this window, you can view and modify various settings related to the adapter, including the IP address settings.

Once you have opened the network adapter properties, you can proceed to find the IP address on Windows by following the further steps mentioned in the guide.

Locating the Internet Protocol Version 4 (TCP/IPV4)

To find the IP address on Windows 10, you need to locate the Internet Protocol version 4 (TCP/IPV4) settings. The IPV4 is the most commonly used set of rules for internet connections and communication.

Here are the steps to locate the IPV4 settings:

1. Press the Windows key + R on your keyboard to open the Run dialog box.
2. Type "ncpa.cpl" in the Run dialog box and press Enter. This will open the Network Connections window.
3. In the Network Connections window, you will see a list of network adapters. Right-click on the network adapter that you are currently using and select "Properties".
4. In the Properties window, scroll down and locate the "Internet Protocol Version 4 (TCP/IPV4)" option.
5. Click on the "Internet Protocol Version 4 (TCP/IPV4)" option and then click on the "Properties" button.

After following these steps, a new window will open, displaying the IP address settings for your network adapter. The IP address will be listed under the "IP address" field.

Note: The IP address displayed in the IPV4 settings is the local IP address assigned to your computer by your router or network administrator. It is not the public IP address that is used to identify your device on the internet.

By following these steps, you can easily locate the Internet Protocol Version 4 (TCP/IPV4) settings and find the IP address on Windows 10.

Finding the IP Address in the IPv4 Address Field

In Windows 10, finding the IP address is a simple process that can be done through the IPv4 address field. The IP address is a unique identifier assigned to every device connected to a network. Here are the easy steps to find the IP address using the IPv4 address field on Windows 10:

Step 1: Open the Network Connections Settings

First, navigate to the desktop on your Windows 10 device. Right-click the network icon located in the system tray at the bottom right corner of the screen, and then click on "Open Network & Internet Settings" from the context menu that appears.

Step 2: Access the Network Adapter Settings

In the network settings window, click on "Change adapter options" under the "Advanced Network settings" section.

A new window will open displaying all the network adapters on your device. Find the network adapter you are currently connected to, right-click it, and then choose "Status" from the context menu.

Step 3: Find the IPv4 Address Field

In the network status window, click on the "Details" button.

A new window will appear displaying detailed information about your network connection. Look for the "IPv4 Address" field. The IP address will be listed next to it.

That's it! You have successfully found the IP address using the IPv4 address field in Windows 10. You can now use this information for various network troubleshooting or configuration purposes.

Checking the Subnet Mask

The subnet mask is an important part of the IP address configuration in Windows 10. It helps in identifying the network and host portions of an IP address. To check the subnet mask on your Windows 10 computer, follow these easy steps:

Step 1: Open the Command Prompt

Click on the Start menu and type Command Prompt. Then, select the Command Prompt app from the search results.

Step 2: Enter the IPConfig Command

In the Command Prompt window, type ipconfig and press Enter. This command will display the IP address configuration information for all the network adapters on your Windows 10 computer.

In the table displayed, locate the subnet mask column. The subnet mask value is shown as a series of four numbers separated by dots, such as 255.255.255.0.

By following these simple steps, you can easily check the subnet mask on your Windows 10 computer. It is important to have the correct subnet mask configuration to ensure proper communication within the network.

Reviewing the Default Gateway

When trying to find the IP address on Windows 10, it's important to review the Default Gateway. The Default Gateway is the network device that connects your computer to the internet or another local network.

There are a few easy steps to review the Default Gateway:

1. Press the Windows key + R on your keyboard to open the Run dialog box.
2. Type "cmd" and press Enter to open the Command Prompt.
3. In the Command Prompt window, type "ipconfig" and press Enter.

This will display a list of network adapters and their configurations. Look for the "Default Gateway" entry, which will typically have an IP address next to it.

If you are connected to a local network, the Default Gateway will usually be the IP address of your router. This is the device that allows your computer to communicate with other devices on the network and access the internet.

Make a note of the Default Gateway's IP address, as it can be useful for troubleshooting network issues or configuring network settings.

Example:

In the above example, the Default Gateway for the Ethernet adapter is 192.168.0.1, while the Default Gateway for the Wi-Fi adapter is 192.168.1.1.

Remember that the Default Gateway may differ depending on your network setup, so be sure to review it whenever you need to find your IP address on Windows 10.

Discovering the IP Address via DHCP

In Windows, the Dynamic Host Configuration Protocol (DHCP) is commonly used to automatically assign IP addresses to devices on a network. If your Windows 10 computer is configured to obtain an IP address automatically, you can easily find the assigned IP address via DHCP.

Step 1: Access Network Settings

To get started, open the Network settings by right-clicking on the network icon in the taskbar and selecting "Open Network & Internet settings." Alternatively, you can access the settings through the Control Panel.

Step 2: View Network Adapter Status

Within the Network settings, click on "Change adapter options" to view the network adapters on your Windows 10 computer. Locate the active network adapter, which is usually labeled as "Ethernet" or "Wi-Fi."

Step 3: Check IPv4 Configuration

Right-click on the active network adapter and select "Properties." In the Properties window, find and double-click on "Internet Protocol Version 4 (TCP/IPv4)." This will open a new window showing the IPv4 configuration.

Step 4: Find the IP Address

In the IPv4 configuration window, make sure the "Obtain an IP address automatically" option is selected. The "IP address" field will display the assigned IP address obtained via DHCP. Take note of this IP address for reference or troubleshooting purposes.

By following these easy steps, you can quickly find the IP address assigned to your Windows 10 computer using DHCP. Remember that the IP address may change if the DHCP lease expires or if there are changes to the network configuration.

Using the Settings App

If you want to find the IP address on Windows 10 using the Settings app, you can follow these easy steps:

1. Click on the "Start" button located at the bottom left corner of the screen.
2. From the Start menu, click on the "Settings" icon, represented by a gear-shaped symbol.
3. In the Settings window, click on the "Network & Internet" option.
4. On the left side panel, click on the "Wi-Fi" or "Ethernet" option, depending on your network connection.
5. Scroll down to the "Properties" section and click on the "Change adapter options" link.
6. A new window will open, displaying the available network connections on your computer.
7. Right-click on the network connection you are currently using and select "Status" from the context menu.
8. In the Status window, click on the "Details" button.
9. A list of network information will appear, including the IP address assigned to your computer.

By following these steps, you can easily find the IP address on Windows 10 using the Settings app. Knowing the IP address of your computer can be helpful for troubleshooting network issues or setting up network connections.

Opening the Windows Settings

To find your IP address on Windows 10, you'll need to open the Windows Settings. Here's how:

Step 1: Click on the Windows Start button located in the bottom left corner of your screen.

Step 2: In the Windows Start menu, click on the gear icon labeled "Settings". This will open the Windows Settings.

Step 3: In the Windows Settings window, click on the category labeled "Network & Internet". This will open the Network & Internet settings.

Step 4: In the Network & Internet settings, click on the tab labeled "Wi-Fi" or "Ethernet", depending on your network connection. This will open the Wi-Fi or Ethernet settings.

Note: If you're connected to a Wi-Fi network, click on the "Wi-Fi" tab. If you're connected to an Ethernet network, click on the "Ethernet" tab.

Step 5: In the Wi-Fi or Ethernet settings, scroll down to the "Network status" section. Here, you'll find your IP address listed under the "IPv4 address" or "IPv6 address" field.

Note: Your IP address may be displayed as a series of numbers and periods (e.g., 192.168.1.1) or as a combination of numbers and letters (e.g., 2001:0db8:85a3:0000:0000:8a2e:0370:7334).

Now that you've opened the Windows Settings and found your IP address, you're ready to use it for various purposes such as troubleshooting network issues or setting up a new device on your network.

Selecting the Network & Internet Category

To find the IP address on Windows 10, you will need to navigate to the Network & Internet category in the Settings menu. This category contains all the network-related settings and options for your computer. Follow the steps below to access the Network & Internet category:

1. Click on the Start menu icon located at the bottom left corner of your screen.
2. From the Start menu, click on the Settings icon.
3. In the Settings window, click on the Network & Internet category.

Once you have selected the Network & Internet category, you will be able to access various network settings, including the ability to find your IP address. This category provides a centralized location for managing your network connections, configuring wireless settings, and troubleshooting network issues. It is an essential tool for any Windows 10 user looking to find their IP address or make network-related changes.

Navigating to the Wi-Fi or Ethernet Settings

To find the IP address on Windows 10, you need to navigate to the Wi-Fi or Ethernet settings on your device. Here are the easy steps to do it:

Step 1: Open Network Connections

Click on the Start menu and select the "Settings" icon (gear icon) to open the Windows Settings window.

In the Windows Settings window, click on the "Network & Internet" option.

Step 2: Access Wi-Fi or Ethernet Settings

In the Network & Internet settings, you will see a list of options on the left-hand side of the window. Click on either the "Wi-Fi" or "Ethernet" option, depending on the type of connection you are using.

If you are connected to a Wi-Fi network, click on the "Wi-Fi" option. If you are connected via an Ethernet cable, click on the "Ethernet" option.

Step 3: View IP Address

Once you have accessed the Wi-Fi or Ethernet settings, you will see the details of your network connection, including the IP address. Look for the "IPv4 address" or "IP address" field, which will display the IP address assigned to your device.

Make a note of the IP address displayed for future reference or to troubleshoot network issues.

By following these easy steps, you can quickly find the IP address on Windows 10, whether you are connected via Wi-Fi or Ethernet.

Clicking on the Network Adapter Name

Once you have opened the Network Connections window, you will see a list of the network adapters available on your Windows 10 PC. The network adapter is the device that allows your computer to connect to the internet. To find the IP address, you need to click on the network adapter name that you are currently using.

Step 1: Open Network Connections

1. Press the Windows key + X on your keyboard and select "Network Connections" from the menu.
2. The Network Connections window will open, displaying all the network adapters on your system.

Step 2: Identify the Network Adapter

In the list of network adapters, find the adapter that is currently active and connected to the network. This adapter will usually have the word "Connected" or "Internet" next to its name.

Step 3: Click on the Network Adapter Name

1. Once you have identified the network adapter, click on its name to select it.
2. The IP address information for the selected network adapter will be displayed in the lower section of the Network Connections window.

By following these easy steps, you can quickly find the IP address of your Windows 10 PC. Knowing your IP address can be helpful for troubleshooting network issues, setting up a network printer, or accessing devices on your local network.

Finding the IP Address in the IPv4 Address Field

When it comes to finding the IP address on a Windows 10 computer, the first step is to open the Command Prompt. To do this, press the Windows key and type "cmd" in the search bar. Then, click on the Command Prompt application.

Once the Command Prompt is open, type the following command: ipconfig and press Enter. This will display a list of network connections and their corresponding IP addresses.

Look for the entry that says "IPv4 Address" followed by a series of numbers separated by periods (e.g., 192.168.0.1). This is your computer's IP address. Take note of this address as you may need it for troubleshooting or network configuration purposes.

Now that you know how to find your IP address in the IPv4 address field, you can easily locate it whenever necessary. Remember, the IP address is a unique identifier that allows devices to communicate within a network, so it can be useful to have this information at hand.

Note: The IP address may change if you are connected to a network that uses DHCP (Dynamic Host Configuration Protocol) to assign IP addresses automatically. In such cases, you may need to repeat these steps to find the updated IP address.

Checking the Subnet Mask

After finding your IP address on Windows 10, it is also important to check the subnet mask. The subnet mask is used to determine the network portion and the host portion of an IP address.

To check the subnet mask on Windows 10, follow these steps:

1. Press the Windows key + X on your keyboard to open the Power User Menu.
2. Select Network Connections from the list.
3. In the Network Connections window, right-click on the network adapter you are currently using and select Status.
4. In the status window, click on the Details button.

A new window will appear with various network details, including the subnet mask. Look for the IPv4 Subnet Mask field to find your subnet mask.

Make sure to note down the subnet mask as it is essential for network configuration and troubleshooting purposes.

Viewing the Default Gateway

To find the IP address on Windows 10, it is important to know how to view the default gateway. The default gateway is the IP address of the router or the modem that connects your device to the internet. It acts as an intermediary between your device and the internet. Viewing the default gateway can provide important information for troubleshooting network issues or configuring network settings.

To view the default gateway on Windows 10, follow these easy steps:

Step 1: Open Command Prompt

Press the Windows key + R on your keyboard to open the Run dialog box. Type "cmd" in the box and press Enter or click OK. The Command Prompt window will open.

Step 2: Enter the Command

In the Command Prompt window, type "ipconfig" and press Enter. This command will display the IP configuration information for all the network interfaces on your Windows 10 device.

Note: If you are using a wired connection, look for the "Ethernet adapter" section. If you are using a wireless connection, look for the "Wireless LAN adapter" section. The default gateway IP address will be listed under the corresponding section.

You can also look for the "Default Gateway" entry, which will display the IP address of the default gateway for the selected network interface.

Step 3: Note the Default Gateway IP Address

Once you find the default gateway IP address, note it down for future reference or use. This IP address can be used to access the router or modem settings.

By following these easy steps, you can quickly find the default gateway IP address on Windows 10, allowing you to troubleshoot network issues and configure network settings with ease.

Obtaining the IP Address via DHCP

If you are using Windows 10, finding the IP address is a simple process thanks to the Dynamic Host Configuration Protocol (DHCP). DHCP allows your computer to automatically obtain an IP address from your network router or server without manually configuring it.

To find your IP address using DHCP, follow these steps:

Step 1: Open the Command Prompt

Press the Windows key + R to open the Run dialog box. Type "cmd" and press Enter.

Step 2: Run the "ipconfig" Command

In the Command Prompt window, type "ipconfig" and press Enter. This will display the network configuration information for all your active network connections.

Look for the "IPv4 Address" listed under the network adapter you are currently using. This is your IP address.

If you are connected to a network, you may also see a "Default Gateway" listed. This is the IP address of your network router.

That's it! You have successfully obtained your IP address using DHCP on Windows 10.

Using Network Troubleshooting Tools

When it comes to finding the IP address on Windows 10, there are several network troubleshooting tools that can make the process easier. These tools can provide you with detailed information about your network settings and help you identify any issues that may be affecting your connection. Here are some of the most commonly used tools:

1. Command Prompt

The Command Prompt is a powerful tool that allows you to execute various commands and functions on your Windows operating system. You can use it to find the IP address of your computer by typing "ipconfig" followed by the Enter key. This will display a list of your network connections along with their respective IP addresses.

2. Network and Sharing Center

The Network and Sharing Center is a built-in utility in Windows 10 that provides a centralized location for managing your network connections. You can access it by right-clicking on the network icon in your system tray and selecting "Open Network and Sharing Center". From there, you can click on the "Change adapter settings" link and then right-click on your network connection to view its properties. The IP address will be listed under the "IPv4 Address" or "IPv6 Address" section.

In addition to these tools, there are also third-party applications available that can help you find the IP address on Windows 10. These applications often provide more advanced features and a user-friendly interface, making them a popular choice for those who are less familiar with the command line.

In conclusion, using network troubleshooting tools can greatly simplify the process of finding the IP address on Windows 10. Whether you choose to use the Command Prompt, Network and Sharing Center, or a third-party application, these tools can provide you with the information you need to manage your network connections effectively.

undefined

How can I find my IP address on Windows 10?

You can find your IP address on Windows 10 by following these easy steps:

Is there a shortcut to find the IP address on Windows 10?

Yes, there is a shortcut to find the IP address on Windows 10. You can use the keyboard shortcut Windows key + R to open the Run dialog box, then type "cmd" and press Enter to open the Command Prompt. In the Command Prompt window, type "ipconfig" and press Enter to see your IP address.