Simple steps to find IP address in Command Prompt

CMD is a powerful tool that allows you to perform various tasks on your computer using command line interface. One useful feature of CMD is the ability to find your IP address. Your IP address is a unique identifier that is assigned to your device when it connects to a network.

So, how can you use CMD to find your IP address? It's actually quite simple. First, open the Command Prompt window by pressing Win+R and typing "cmd" in the Run dialog box. Once the Command Prompt window is open, type "ipconfig" and press Enter.

This command will display a list of network connections on your device, along with their associated IP addresses. Look for the section labeled "Ethernet adapter", "Wireless adapter", or something similar, depending on your network connection type. Under this section, you will find your IP address listed as "IPv4 Address".

It's important to note that your IP address may change over time, especially if you are using a dynamic IP address. So, if you need to find your IP address at a later time, simply repeat the steps outlined above.

What is an IP address?

An IP address, or Internet Protocol address, is a unique numerical label assigned to each device connected to a computer network that uses the Internet Protocol for communication. It serves two main functions: identifying the host or network interface, and providing the location of the device in the network.

IP addresses are typically written in a format called dot-decimal notation, which consists of four sets of numbers separated by periods. Each set can range from 0 to 255, representing 8 bits of the IP address. For example, an IP address might look like this: 192.168.0.1.

There are two types of IP addresses: IPv4 and IPv6. IPv4 is the most common type and uses 32 bits, allowing for approximately 4.3 billion unique addresses. IPv6, on the other hand, uses 128 bits and can accommodate an unimaginably large number of IPs.

Understanding IP addresses is essential for various networking tasks, including finding the IP address of a device using the command prompt (CMD) in Windows. By using the "ipconfig" command in CMD, you can retrieve the IP address of your computer, as well as other network-related information.

Knowing how to find your IP address in CMD can be helpful for troubleshooting network connectivity issues, setting up networked devices, or simply understanding your network configuration.

Why do you need to find IP address?

In the world of technology, there are numerous reasons why you might need to find an IP address. An IP address is a unique identifier that is assigned to each device connected to a network. By knowing the IP address of a device, you can establish a connection to it and perform various tasks.

One common reason to find an IP address is troubleshooting network connectivity issues. By using the command prompt (CMD) in Windows, you can quickly locate the IP address of your own device or another device on your network. This information can be helpful in diagnosing and resolving network-related problems.

Finding an IP address is also useful for accessing network resources. If you want to connect to another computer or device on your network, you will need to know its IP address. This allows you to establish a direct connection and share files, printers, or other resources. By using CMD to find the IP address, you can easily access the desired device.

Additionally, finding IP addresses can be important for security purposes. If you suspect unauthorized access to your network or are dealing with suspicious activity, knowing the IP addresses of connected devices can help you identify potential threats. You can use CMD to track down the source of any suspicious activity and take appropriate action to protect your network.

In conclusion, finding IP addresses using CMD is a valuable skill that can be used for troubleshooting, resource sharing, and network security purposes. By understanding how to find IP addresses, you can effectively manage your network and ensure its smooth operation.

Methods of finding IP address in CMD

In Command Prompt (CMD), there are several methods you can use to find the IP address of your device. Here are a few common methods:

1. Using the "ipconfig" command

The easiest way to find your IP address in CMD is to use the "ipconfig" command. Simply open the Command Prompt and type "ipconfig", then press Enter. The command will display a list of network adapters on your device, along with their IP addresses. Look for the "IPv4 Address" or "IP Address" entry to find your IP address.

2. Using the "nslookup" command

Another method is to use the "nslookup" command. Open the Command Prompt and type "nslookup", followed by a space and your domain name or website address (e.g., "nslookup google.com"). Press Enter to execute the command. The output will display the IP address associated with the specified domain.

These are just a couple of the methods you can use to find your IP address in CMD. There are various other commands and tools available that can provide more detailed information about your network connection.

Using the "ipconfig" command

cmd, which stands for Command Prompt, is a command-line interpreter program available in Windows operating systems. Using cmd, you can execute various commands to perform different tasks on your computer.

One of the useful commands in cmd is ipconfig. This command allows you to find information about your IP address, including the IPv4 and IPv6 addresses, the subnet mask, and the default gateway.

To find your IP address using the ipconfig command, follow these steps:

1. Open the Command Prompt by pressing the Windows key + R, typing "cmd" in the Run dialog box, and pressing Enter.
2. In the Command Prompt window, type "ipconfig" and press Enter. This will display the IP configuration information for your computer.
3. Look for the "IPv4 Address" or "IPv6 Address" under the network adapter you are currently connected to. These addresses represent your IP address.

Using the ipconfig command is a quick and easy way to find your IP address in the cmd. It can be useful for various troubleshooting tasks or when you need to know your IP address for networking purposes.

Using the "nslookup" command

The "nslookup" command is a powerful tool in Windows Command Prompt (CMD) that allows you to find the IP address associated with a particular domain name. This can be useful for various purposes, including troubleshooting network issues or verifying DNS configurations.

To use the "nslookup" command in CMD, follow these steps:

1. Open Command Prompt by pressing the Windows Key + R, typing "cmd" in the Run dialog, and clicking "OK".
2. Type "nslookup" followed by the domain name or hostname you want to find the IP address for. For example, to find the IP address of "example.com", you would type "nslookup example.com".
3. Press Enter to execute the command.
4. The output will display the IP address associated with the specified domain name, along with additional information such as the DNS server that provided the answer.

Here is an example of how the output of the "nslookup" command might look:

Server:  UnKnown
Address:  192.168.1.1
Name:    example.com
Addresses:  93.184.216.34

Troubleshooting DNS

If you're experiencing DNS-related issues, such as domain name resolution problems, you can use the "nslookup" command to help diagnose the problem. By entering different domain names and examining the corresponding IP addresses, you can determine if the issue is with your DNS server or network configuration.

Verifying DNS Configurations

Additionally, the "nslookup" command can be used to validate DNS configurations. By comparing the IP address obtained from the command with the expected IP address, you can ensure that your DNS records are correctly set up and resolving to the intended destinations.

Remember to always use the "nslookup" command responsibly and only on domains or hostnames that you have permission to query. Misusing this command can be a violation of privacy and may result in legal consequences.

Overall, the "nslookup" command is a valuable tool for finding IP addresses in CMD and can be helpful for troubleshooting network issues or verifying DNS configurations.

Using the "ping" command

The "ping" command is a useful tool in the CMD (Command Prompt) to find the IP address of a website or device. It allows you to send a network request to the specified target and see the response time, which includes the IP address.

To use the "ping" command:

1. Open the CMD by pressing the Windows key + R, typing "cmd" in the Run dialog, and pressing Enter.
2. Type "ping" followed by the website URL or IP address you want to find the IP for.
3. Press Enter.

For example, if you want to find the IP address of the website "www.example.com", you would type "ping www.example.com" and press Enter. The CMD will send network requests to the target and display the IP address in the output.

The "ping" command can be useful for troubleshooting network connectivity issues, verifying if a website is online, or finding the IP address of a device on your local network.

Using the "tracert" command

To find the IP address of a website or network using the tracert command in the Command Prompt (CMD), follow these steps:

1. Open the Command Prompt by typing "cmd" in the Windows search bar and selecting the Command Prompt app.
2. In the Command Prompt window, type tracert followed by the domain name or IP address you want to trace. For example, if you want to trace the IP address of google.com, type tracert google.com.
3. Press Enter to run the command.

The tracert command will then start tracing the route that data takes to reach the specified destination. It will display a list of IP addresses of intermediary routers along the path, as well as the time it takes for packets to reach each router.

This information can be useful for troubleshooting network issues, as it shows where the connection might be experiencing delays or errors. It can also help identify the geographical location of certain network nodes.

By default, the tracert command sends three ICMP Echo Request packets per hop and waits for a response before moving on to the next hop. You can adjust the number of packets sent using the -h flag followed by the desired number.

Example:

To trace the route to google.com and send four packets per hop, use the following command:

tracert -h 4 google.com

This will display the route with four packets sent to each hop.

Summary

The tracert command in CMD is a powerful tool for tracing the route and finding the IP address of a website or network. It provides valuable information about the path packets take to reach their destination, helping to identify any issues along the way.

Using the "netstat" command

To find the IP address of a website or a remote server using the command prompt (CMD) in Windows, you can use the "netstat" command. Netstat is a powerful networking tool that displays active network connections, listening ports, and various other network statistics.

Here's how you can use the "netstat" command to find an IP address:

Step 1: Open the command prompt

Open the command prompt by pressing the Windows key + R, typing "cmd" in the Run dialog box, and pressing Enter. This will open the command prompt window.

Step 2: Enter the netstat command

In the command prompt window, type "netstat" followed by the desired options. To find the IP address, you can use the "-a" option to display all active connections and listening ports.

For example, you can type the following command:

netstat -a

Step 3: Analyze the output

Once you enter the netstat command, you will see a list of active connections and listening ports. Look for the IP address you are interested in under the "Foreign Address" column. The IP address will be in the format of "IP:port".

For example, if you are trying to find the IP address of a website, look for the IP address associated with the website's domain name or URL.

Note: The netstat command may display a large amount of information. You can use the "find" command to filter the results and find specific IP addresses or ports. For example, you can use:

netstat -a | find "192.168.0.1"

This command will display all active connections and listening ports that have the IP address "192.168.0.1" in them.

Using the "netstat" command in CMD is a quick and efficient way to find the IP address of a website or a remote server. It provides you with valuable information about active connections and network statistics.

Using the "arp" command

The "arp" command is a useful tool to find IP addresses in the Command Prompt (CMD) on a Windows operating system. ARP stands for Address Resolution Protocol, which is responsible for mapping an IP address to a physical (MAC) address on a local network.

To use the "arp" command, follow these steps:

1. Open the Command Prompt by typing "cmd" in the Windows search bar and clicking on the "Command Prompt" application.
2. Type the command "arp -a" and press Enter. This will display a list of all the IP addresses that your computer has communicated with recently.
3. Look for the IP address you are interested in. The list will include both IPv4 and IPv6 addresses, so make sure to identify the correct one.
4. Next to the IP address, you will see the corresponding MAC address, as well as the type of connection (Ethernet or Wi-Fi).

The "arp" command can be helpful in various situations, such as troubleshooting network issues or identifying devices on your local network. It provides a quick and easy way to find IP addresses without the need for additional software or tools.

Using the "route" command

To find the IP address using the "route" command in CMD, follow the steps below:

Step 1: Open Command Prompt

Step 2: Type "route print" and press Enter

Step 3: Look for the row that starts with "0.0.0.0" or "Default" in the "Network Destination" column

Step 4: The IP address will be displayed in the "Gateway" column

Here is an example of what the output may look like:

In the example above, the IP address is "192.168.1.1".

Using the "route" command can be helpful when you need to quickly find the default gateway IP address on your network. It provides a straightforward way to obtain this information without the need for any additional software.

Using the "telnet" command

Another method to find your IP address in the Windows Command Prompt (CMD) is by using the "telnet" command. Telnet is a protocol that allows you to establish a remote connection to another device or computer over the internet or a local network.

To use the "telnet" command to find your IP address, follow these steps:

1. Open the Windows Command Prompt by pressing the Windows key + R, typing "cmd" (without quotes) and pressing Enter.
2. In the Command Prompt window, type "telnet" followed by a space and the IP address or domain name you want to connect to. For example: telnet google.com.
3. Press Enter to execute the command.

If the connection is successful, you will see the IP address of the device or computer you are connecting to displayed on the screen. Look for the line that starts with "Trying" or "Connected to" followed by the IP address.

Example:

Suppose you want to find the IP address of the website "google.com" using the "telnet" command. You would enter the following command:

telnet google.com

The Command Prompt will attempt to establish a connection to google.com and display the IP address if successful.

Using the "hostname" command

If you want to find your IP address using the command prompt on a Windows operating system, you can use the "hostname" command. This command will display the hostname and IP address of the computer you are currently using.

To use the "hostname" command, follow these steps:

1. Open the command prompt by pressing the Windows key + R and typing "cmd".
2. In the command prompt window, type "hostname" and press Enter.

After executing the command, the hostname and IP address associated with your computer will be displayed on the screen. The IP address will be listed next to the hostname.

This method is useful when you want to quickly find the IP address of the computer you are using without navigating through multiple settings menus. It is a simple and effective way to obtain this information.

By using the "hostname" command in the command prompt, you can easily find your IP address and use it for various purposes like configuring network settings, accessing remote resources, or troubleshooting network connectivity issues.

Important Note:

There are other commands, like "ipconfig", that provide more detailed information about the network configuration of your computer. However, the "hostname" command is a quick and easy way to find your IP address without the need for additional parameters or options.

In summary,

The "hostname" command in the command prompt can help you quickly find the IP address of the computer you are currently using. Simply open the command prompt, type "hostname", and press Enter to see the hostname and associated IP address on the screen.

Using the "whois" command

If you want to find more information about an IP address, you can use the "whois" command in CMD. The "whois" command allows you to look up details such as the owner of the IP address, the organization it belongs to, and contact information.

Step 1: Open CMD

To start, open the Command Prompt by searching for "CMD" in the Windows search bar and clicking on the "Command Prompt" app.

Step 2: Enter the "whois" command

Once you have the Command Prompt window open, type "whois" followed by the IP address you want to look up. For example, if you want to find information about the IP address 192.168.0.1, you would enter:

whois 192.168.0.1

Press enter to execute the command.

Step 3: View the results

After entering the "whois" command, you will see the results provided by the WHOIS database. These results will include information such as the IP address's registration date, the owner's name and contact information, and the organization associated with the IP address.

Using the "whois" command can be helpful if you want to gather more information about an IP address and its owner. This information can be useful in troubleshooting network issues or identifying potential security threats. Just remember to use this command responsibly and respect privacy.

Using the "dig" command

In addition to the "cmd" command, another useful tool for finding IP addresses is the "dig" command. While "cmd" is only available on Windows systems, "dig" is a command-line tool that is available on both Linux and macOS systems.

The "dig" command allows you to perform DNS queries and retrieve information about various DNS records, including the IP address associated with a domain name.

Steps to use the "dig" command:

1. Open the command prompt on your Linux, or macOS system.
2. Type the following command: dig [domain name]
3. Press Enter to execute the command.

For example, if you want to find the IP address of the domain "example.com", you would type: dig example.com

The "dig" command will then display the IP address associated with the domain name, as well as other DNS information.

Using the "dig" command can be a useful alternative to "cmd" for finding IP addresses, especially if you are using a Linux or macOS system.

Using the "ifconfig" command

The "ifconfig" command is a powerful tool that allows you to find information about network interfaces and the IP address associated with them. Here's how you can use the "ifconfig" command in the Windows Command Prompt (CMD) to find your IP address:

Step 1: Open the Command Prompt

To open the Command Prompt, press the Windows key + R on your keyboard to open the Run dialog box. Then, type "cmd" and press Enter or click on the "OK" button.

Step 2: Enter the "ifconfig" command

Once the Command Prompt is open, type "ipconfig" and press Enter. This will display a list of all the network interfaces on your computer along with their IP addresses.

Look for the "IPv4 Address" line under the network interface you are currently using. The IP address listed here is your computer's IP address.

Using the "ifconfig" command is a quick and easy way to find your IP address in CMD. It provides detailed information about your network interfaces, including the IP address assigned to each interface.

Using the "dig +short" command

If you are using the command prompt (CMD) on your computer and want to find IP addresses, you can use the "dig +short" command. This command is available on Linux, macOS, and Windows systems.

To use the "dig +short" command, follow these steps:

Step 1: Open the command prompt

First, open the command prompt on your computer. In Windows, you can do this by pressing the Windows key + R to open the Run dialog box. Then, type "cmd" and press Enter.

Step 2: Enter the "dig +short" command

Once the command prompt is open, you can enter the "dig +short" command followed by the domain or hostname you want to find the IP address for. For example, to find the IP address of google.com, you would enter:

dig +short google.com

Press Enter to execute the command.

Step 3: View the IP address

After executing the command, you will see the IP address of the specified domain or hostname. The IP address will be displayed in the command prompt window.

Using the "dig +short" command is a quick and easy way to find IP addresses in the command prompt. It provides a concise output, making it useful for scripting or automation tasks. So, next time you need to find an IP address, give the "dig +short" command a try!

Using the "ip route" command

If you are wondering how to find your IP address using the Command Prompt (CMD), one way to do it is by using the "ip route" command. This command allows you to view the routing table of your computer, which contains information about how data is being sent and received.

Step 1: Open Command Prompt

First, you need to open the Command Prompt. You can do this by pressing the Windows key + R, typing "cmd", and then pressing Enter.

Step 2: Run the "ip route" command

Once the Command Prompt is open, type "ip route" and press Enter. This will display the routing table for your computer.

The routing table will show you a list of all the network destinations your computer can communicate with, along with the IP address associated with each destination. Look for the line that says "default" or "0.0.0.0" under the "Destination" column. The IP address listed in the "Gateway" column next to it is your computer's IP address.

Additionally, you can use the "ifconfig" command to get more detailed information about the network interfaces on your computer, including their IP addresses.

Using the "ip route" command in CMD is a quick and easy way to find your IP address without the need for third-party software or websites. It provides you with the necessary information to troubleshoot network connectivity issues or configure network settings.

Note: The "ip route" command may vary slightly depending on the operating system you are using. Make sure to check the documentation for your specific operating system to ensure the correct usage of this command.

Using the "ip address show" command

To find the IP address in the command prompt (CMD) on Windows, you can use the "ip address show" command. This command is widely used on Linux systems and can also be used on Windows systems with the Windows Subsystem for Linux (WSL) installed. The "ip address show" command displays the IP addresses assigned to the network interfaces on your computer.

Step 1: Open the command prompt

First, open the command prompt by clicking on the Start menu and typing "cmd" in the search bar. Then, click on the "Command Prompt" application that appears in the search results.

Step 2: Run the "ip address show" command

Once the command prompt is open, type "ip address show" (without the quotes) and press Enter. This will run the command and display the IP addresses assigned to your network interfaces.

To find the IP address you need, look for the line that starts with "inet" followed by the IP address. The IP address will be displayed next to the "inet" keyword. For example:

• inet 192.168.0.2/24

In this example, the IP address is 192.168.0.2.

If you have multiple network interfaces, such as a Wi-Fi adapter and an Ethernet adapter, you will see multiple lines with different IP addresses. Make sure to identify the IP address associated with the network interface you are interested in.

This is how you can use the "ip address show" command in CMD to find the IP address assigned to your network interfaces. It can be a helpful tool for troubleshooting network connectivity or configuring network settings on your computer.

Using the "ip link show" command

If you want to find your IP address using the command prompt (CMD), you can use the "ip link show" command. This command is available on most operating systems and allows you to view information about your network interfaces, including their IP addresses.

To use the "ip link show" command, open the CMD and type the following command:

ip link show

After executing the command, you will see a list of network interfaces and their corresponding information, such as MAC address, state, and IP address.

The IP address can usually be found under the "inet" field for each interface. It will be displayed in the format of an IP address followed by a slash and a number, representing the subnet mask.

By using the "ip link show" command, you can quickly find your IP address without the need for additional software or tools. This can be useful for troubleshooting network issues or configuring network settings from the command prompt.

Using the "ip neigh show" command

If you're looking to find the IP address of a device in your network using the command prompt in Windows (CMD), you can use the "ip neigh show" command. This command allows you to view the IP and MAC addresses of devices currently connected to your network.

To use the "ip neigh show" command, follow these steps:

1. Open the command prompt by pressing the Windows key + R, typing "cmd" in the Run dialog, and pressing Enter.
2. In the command prompt window, type "ip neigh show" and press Enter.
3. A list of devices connected to your network, along with their IP and MAC addresses, will be displayed.
4. Look for the device you're interested in and note its IP address.

Using the "ip neigh show" command can be a convenient way to quickly find the IP address of a device in your network without the need for additional tools or software. Remember that this command will only display devices that are currently connected to your network, so if the device you're looking for is not connected, it may not appear in the list.

Note: The "ip neigh show" command is specific to Linux-based operating systems. If you're using Windows, you can use the "arp -a" command instead to achieve a similar result.

Using the "ip -4 address show" command

If you want to find an IP address using the Command Prompt (CMD), you can use the "ip -4 address show" command. This command is specific to systems running Linux or UNIX-like operating systems, such as Ubuntu or CentOS.

To use the "ip -4 address show" command, follow these steps:

Step 1: Open the Command Prompt

Open a Command Prompt window by searching for "cmd" in the Start menu or pressing the Windows key + R, typing "cmd" in the Run dialog box, and pressing Enter.

Step 2: Enter the command

Type the following command in the Command Prompt window and press Enter:

• ip -4 address show

This command will display a list of network interfaces and their associated IP addresses. Look for the interface you are interested in, and you will find the corresponding IP address.

It is worth noting that this command will only show IPv4 addresses and not IPv6 addresses. If you are specifically looking for IPv6 addresses, you can use the "ip -6 address show" command instead.

That's it! Using the "ip -4 address show" command in CMD allows you to quickly find the IP address associated with a specific network interface on your Linux or UNIX-like operating system.

Using the "ip -6 address show" command

If you are looking to find the IPv6 address using the command prompt (CMD), you can use the "ip -6 address show" command. This command will display the IPv6 address information available for your network interface.

Step 1: Open the Command Prompt

To begin, open the Command Prompt on your Windows computer. You can do this by pressing the Windows key + R, typing "cmd" in the Run dialog box, and pressing Enter.

Step 2: Enter the Command

Once the Command Prompt is open, type "ip -6 address show" (without the quotes) and press Enter. This command will display detailed information about the IPv6 addresses associated with your network interface.

Step 3: Locate the IPv6 Address

After entering the command, you will see a list of network interfaces along with their respective IPv6 addresses. Look for the interface that you are interested in, and locate the IPv6 address associated with it.

If you have multiple network interfaces, such as Ethernet and Wi-Fi, you may need to identify the correct interface first. You can do this by examining the interface name, such as "Ethernet" or "Wi-Fi" in the list.

Note: The IPv6 address may be displayed in a different format, such as "inet6" or "inet6 addr" depending on the version of the Command Prompt you are using.

Additional Information

In addition to the IPv6 address, the "ip -6 address show" command can provide other useful information such as the prefix length and the interface's scope. This information can help you understand the configuration and connectivity of your network interface.

If you encounter any issues or do not see the expected output, ensure that you have administrative privileges on your computer and that IPv6 is enabled on your network interface.

By using the "ip -6 address show" command in the Command Prompt, you can easily find the IPv6 address associated with your network interface.

Using the "ip -4 route show" command

In order to find your IP address using the Windows Command Prompt (CMD), you can use the "ip -4 route show" command. This command allows you to view your IPv4 routing table, which includes information about your IP address and how to reach different networks or hosts.

To use the "ip -4 route show" command, follow these steps:

1. Open the Command Prompt by typing "cmd" into the Windows search bar and selecting the Command Prompt application.
2. In the Command Prompt window, type "ip -4 route show" and press Enter.
3. You will see a list of routes displayed, including the default gateway, network destination, and netmask. Look for the entry labeled "default" to find your IP address.
4. Your IP address will be displayed next to the "default via" field. It will be in the format XXX.XXX.XXX.XXX, where each "X" represents a number between 0 and 255.

This command is useful for quickly finding your IP address in a Windows CMD environment. By using the "ip -4 route show" command, you can easily view your IP information and troubleshoot any network connectivity issues you may be experiencing.

Using the "ip -6 route show" command

To find the IP address using the command prompt, you can use the "ip -6 route show" command. This command will display the IPv6 routing table on your computer.

To execute this command, follow these steps:

Step 1: Open the Command Prompt

To open the Command Prompt, press the Windows key + R on your keyboard to open the Run dialog box. Type "cmd" and press Enter.

Step 2: Execute the "ip -6 route show" command

In the Command Prompt window, type "ip -6 route show" and press Enter. This command will display the IPv6 routing table, which includes information about the IP addresses on your computer.

By using the "ip -6 route show" command, you can quickly find the IPv6 address assigned to your computer. This can be useful for troubleshooting network issues or for configuring specific network settings.

Question-answer:

What is CMD?

CMD stands for Command Prompt, it is a command-line interpreter program that is available in Windows operating systems. It allows users to execute various commands and perform administrative tasks on their computer.

How can I open CMD on my computer?

To open CMD, you can press the Windows key + R to open the Run dialog box, then type "cmd" and press Enter. Another way is to search for "Command Prompt" in the Start menu or by using the search function in Windows.

What is an IP address?

An IP address (Internet Protocol address) is a unique numerical label assigned to each device that is connected to a computer network using the Internet Protocol. It serves two main functions: identifying the host or network interface, and providing the location of the host in the network.

How can I find my IP address using CMD?

To find your IP address using CMD, you can open Command Prompt and type "ipconfig" and press Enter. This will display a list of network interfaces along with their IP addresses. Look for the "IPv4 Address" field to find your IP address.

Is there any other way to find IP address on Windows?

Yes, apart from using CMD, you can also find your IP address by accessing the network settings in the Control Panel. Go to Control Panel > Network and Internet > Network and Sharing Center, and click on the connection type (e.g. Wi-Fi or Ethernet). Then click on the "Details" button, and you will see your IP address listed under the "IPv4 Address" field.

What is CMD?

CMD stands for Command Prompt. It is a command-line interpreter program on Windows operating systems that allows users to enter commands to execute various processes or tasks directly.

Why do I need to find my IP address in CMD?

There are various reasons why you might need to find your IP address in CMD. For example, you may need to troubleshoot network connectivity issues, set up a network printer, or configure port forwarding on your router.