IP settings are an essential part of your computer's network configuration. They determine how your device connects to the internet and interacts with other devices on the network. Finding your IP settings can be particularly useful when troubleshooting network issues or setting up a new device. In this step-by-step guide, we will walk you through the process of finding your IP settings on various operating systems.
Windows: To find your IP settings on a Windows computer, navigate to the Control Panel and open the Network and Sharing Center. From there, click on the "Change adapter settings" option. Right-click on the network connection you are currently using and select "Properties". In the Properties window, scroll down to find the "Internet Protocol Version 4 (TCP/IPv4)" or "Internet Protocol Version 6 (TCP/IPv6)" entry and click on it. Here, you will see your IP address, subnet mask, default gateway, and DNS server addresses.
Mac: On a Mac, go to the Apple menu and select "System Preferences". In the System Preferences window, click on the "Network" icon. From the list of available connections on the left side, select the network connection you are using. Click on the "Advanced" button in the bottom right corner. In the "TCP/IP" tab, you will find your IP address, subnet mask, router address, and DNS server addresses.
Linux: The process of finding IP settings on Linux may vary depending on the distribution you are using. In most cases, you can open a terminal window and enter the command "ifconfig" or "ip addr" to display your network interface information. Look for the entry corresponding to your active network connection to find your IP address, subnet mask, and other network settings.
By following these step-by-step instructions, you can easily find your IP settings on different operating systems. Knowing these settings can help you troubleshoot network issues or configure your device to work optimally on a network. Remember to take note of your IP address, subnet mask, router address, and DNS server addresses as they may be required for network configurations.
What are IP Settings?
IP settings are a configuration on a device or network that allow it to connect to the Internet using the Internet Protocol (IP). IP is a set of rules and protocols that govern how data is sent and received over the Internet.
IP settings determine the IP address of a device, which is a unique identifier that allows devices to communicate with each other on a network. IP settings also include information such as the subnet mask, which determines the size of the network, and the default gateway, which is the IP address of the router that connects the network to the Internet.
These settings are important as they determine how a device or network can communicate with other devices and networks on the Internet. By configuring the correct IP settings, devices can establish a connection to the Internet and communicate with other devices and servers using the IP protocol.
IP settings can be configured manually or obtained automatically through a DHCP (Dynamic Host Configuration Protocol) server. Manual configuration allows for greater control over the settings, while DHCP automatically assigns IP settings to devices on a network.
In order to troubleshoot network connectivity issues or set up a new network, it is often necessary to find the IP settings on a device. This can be done through the device's network settings or by using IP configuration tools and commands.
Overall, IP settings are an integral part of network configuration, enabling devices to connect and communicate with each other on the Internet.
Why are IP Settings Important?
IP settings, also known as Internet Protocol settings, are an essential aspect of network connectivity. They play a crucial role in enabling devices to communicate with each other efficiently and securely over the internet.
1. Unique Identification
One of the primary reasons why IP settings are important is that they provide a unique identification for every device connected to a network. Every device, be it a computer, smartphone, or Internet of Things (IoT) device, requires an IP address to establish communication with other devices on the network.
IP addresses consist of a series of numbers and serve as a digital identifier for each device. With IP settings, devices can find and recognize each other on the network, allowing for seamless communication and data transfer.
2. Network Configuration
IP settings also play a vital role in network configuration. By configuring IP settings, network administrators can assign specific IP addresses to devices, define subnet masks, set up default gateways, and configure DNS servers.
Proper network configuration is crucial in ensuring that devices can connect to the correct networks and access the internet. IP settings enable devices to navigate through complex networks, find the appropriate routers and gateways, and establish reliable connections.
3. Security and Privacy
IP settings are essential in maintaining network security and privacy. By configuring IP settings, it is possible to implement security measures such as firewalls and access control lists (ACLs) to restrict unauthorized access to devices and networks.
Additionally, IP settings allow for the allocation of private IP addresses, which can help protect devices from external threats on the internet. Network administrators can also use IP settings to set up virtual private networks (VPNs) for secure remote access to the network.
| Benefits of IP Settings: | Summary |
|---|---|
| Unique Identification | Allows devices to find and recognize each other on the network |
| Network Configuration | Enables proper network setup and navigation |
| Security and Privacy | Helps implement security measures and protect devices |
In conclusion, IP settings are of utmost importance in establishing and maintaining network connectivity. They provide unique identification, facilitate network configuration, and enhance security and privacy. Proper understanding and management of IP settings are essential for ensuring efficient and secure communication between devices on a network.
Step 1: Open Network Settings
In order to find your IP settings, you first need to open your network settings. To do this, follow the steps below:
Windows:
- Click on the Start button in the bottom left corner of your screen.
- Type "network settings" in the search bar and select the "Network settings" option from the search results.
- A new window will open with your network settings.
Mac:
- Click on the Apple menu in the top left corner of your screen.
- Select "System Preferences" from the dropdown menu.
- Click on the "Network" icon.
- A new window will open with your network settings.
Linux:
- Click on the network icon in the top right corner of your screen.
- Select "Settings" from the dropdown menu.
- A new window will open with your network settings.
Once you have opened your network settings, you will be able to access and view your IP settings, such as your IP address, subnet mask, and gateway.
Click on the Start Menu
To find your IP settings, you will need to start by clicking on the Start Menu. The Start Menu is usually located at the bottom left corner of your screen and is represented by the Windows logo icon.
Once you have clicked on the Start Menu, a menu will appear with various options. Look for the "Settings" option and click on it.
Clicking on the "Settings" option will open the Windows Settings menu.
Open the Control Panel
To find the IP settings, you'll need to open the Control Panel on your computer. Here's how:
- Click on the "Start" button located in the bottom left corner of your screen.
- Type "Control Panel" in the search bar and click on the Control Panel app.
- Once the Control Panel opens, navigate to the "Network and Internet" settings.
- Within the "Network and Internet" settings, click on "Network and Sharing Center".
- In the "Network and Sharing Center", look for the network connection that you are currently using (e.g., Ethernet, Wi-Fi).
- Click on the name of your network connection.
- A new window will open showing the network status. Click on the "Details" button.
- In the "Network Connection Details" window, you will find the IP address, subnet mask, default gateway, and other settings.
By following these steps, you will be able to open the Control Panel on your computer and find the IP settings for your network connection.
Select Network and Internet
Once you have opened the settings on your device, the next step is to select the "Network and Internet" option. This will allow you to access the various network settings on your device.
To find this option, you may need to scroll through the settings menu. Look for the "Network and Internet" or similar option, which is typically represented by an icon of two connected devices or a network signal.
Once you have located the "Network and Internet" option, select it by tapping or clicking on it. This will take you to the network settings page where you can find and configure your IP settings.
By selecting the "Network and Internet" option, you are one step closer to finding the IP settings of your device.
Choose Network and Sharing Center
To find your IP settings, you will need to navigate to the Network and Sharing Center on your computer. Follow these steps:
- Click on the Start menu and type "Network and Sharing Center" in the search bar.
- Click on the "Network and Sharing Center" option from the search results.
- A window will open displaying your current network connection. This window provides an overview of your network status and settings.
- From the left-hand menu, click on the "Change adapter settings" link.
- This will open a new window that displays all of your network adapters.
- Right-click on the adapter that you are currently using (such as Ethernet or Wi-Fi) and select "Properties" from the context menu.
- A new window will appear with the properties of your selected network adapter.
- Scroll down the list and locate the "Internet Protocol Version 4 (TCP/IPv4)" option.
- Click on the "Properties" button below this option.
- A final window will appear displaying your IP settings, including the IP address, subnet mask, default gateway, and DNS server addresses.
By following these steps, you will be able to find and view your IP settings on your computer's Network and Sharing Center.
Step 2: Access Adapter Settings
After determining the IP address, the next step is to access the adapter settings to find more specific information about your network connection.
To access the adapter settings, follow these steps:
- Click the Start button and open the Control Panel.
- Click on Network and Internet, and then click on Network and Sharing Center.
- On the left side of the screen, click on Change adapter settings.
This will open a window displaying all the network adapters on your computer. Look for the one that is currently in use, which will likely be labeled as Connected or have a status of Enabled.
Right-click on the adapter and select Properties. This will open a new window with the adapter properties.
In this window, you will find the IP settings for the adapter. Look for the Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6) entry, depending on your network configuration.
| IP Settings | Description |
|---|---|
| IP Address | The unique numerical identifier assigned to your device on the network. |
| Subnet Mask | Determines the range of IP addresses available on your network. |
| Default Gateway | The IP address of your router or modem, which allows you to access the internet. |
| DNS Servers | The IP addresses of the servers that translate domain names into IP addresses. |
Take note of these settings or write them down for future reference.
Once you have finished reviewing the adapter settings, you can close the windows and return to the previous screen.
Click on Change Adapter Settings
After accessing the Network and Sharing Center, the next step is to find the "Change Adapter Settings" option. This option allows you to view and modify the settings of your network adapters.
To find the "Change Adapter Settings" option, you can follow these steps:
- Go to the Control Panel by clicking on the Start menu and selecting Control Panel.
- In the Control Panel, click on the Network and Internet option.
- In the Network and Internet menu, click on the Network and Sharing Center option.
- On the left side of the Network and Sharing Center, you will see a list of options. Click on the "Change Adapter Settings" option.
Once you click on the "Change Adapter Settings" option, a new window will open, displaying all the network adapters installed on your computer. From here, you can view and modify the IP settings of each adapter as needed.
Right-click on the Network Connection
To find IP settings on your device, you will need to access the network settings. One way to do this is by right-clicking on the network connection icon in the system tray. The network connection icon is usually located in the bottom right corner of the screen, next to the clock.
Once you right-click on the network connection icon, a menu will appear with various options. Look for the option that says "Open Network and Sharing Center" or something similar. Click on this option to open the network settings.
In the Network and Sharing Center, you will find a list of all the network connections on your device. Look for the connection that you are currently using and right-click on it. From the menu that appears, choose the option that says "Properties".
By selecting "Properties", you will be able to access the settings for that particular network connection. Within the properties window, you can find the IP settings by clicking on the "Internet Protocol Version 4 (TCP/IPv4)" or "Internet Protocol Version 6 (TCP/IPv6)" option.
Once you select the IP version, click on the "Properties" button to view or change the IP settings. Here, you can find and configure the IP address, subnet mask, default gateway, and DNS server addresses.
Remember, the steps to find IP settings may vary slightly depending on your operating system or device. However, in most cases, right-clicking on the network connection icon and accessing the properties will lead you to the IP settings.
Select Properties
Once you have opened the Network Connections window, you will need to select the network connection for which you want to find the IP settings. Right-click on the network connection and choose Properties from the drop-down menu.
By selecting Properties, you will open the settings window for the network connection. This window will contain all the configuration options for the network connection, including the IP settings.
In the Properties window, you will typically find several tabs, such as General, Networking, Security, and others. The tab you are interested in is Networking, as it contains the IP settings for the selected network connection.
Click on the Networking tab to access the IP settings. Here, you will find options for configuring the IP address, Subnet Mask, Default Gateway, and DNS servers.
Make sure to review and adjust the IP settings as needed. You can manually enter the desired IP address or choose to obtain the settings automatically from a DHCP server.
After making any necessary changes, click OK to save the new IP settings. The changes will take effect immediately.
Step 3: View IP Settings
Once you have identified the network connection that you want to view the IP settings for, you can easily find the IP settings by following these steps:
- Right-click on the network connection icon in the system tray or open the Network and Sharing Center from the Control Panel.
- Select "Open Network and Sharing Center" from the context menu.
- In the Network and Sharing Center window, click on the "Change adapter settings" link.
- In the Network Connections window, you will see a list of all the network connections available on your system. Right-click on the network connection that you want to view the IP settings for.
- Select "Properties" from the context menu.
- In the Properties window, scroll down and find the "Internet Protocol Version 4 (TCP/IPv4)" or "Internet Protocol Version 6 (TCP/IPv6)" entry.
- Click on the entry to select it and then click on the "Properties" button.
- In the IP Properties window, you will see the IP address, subnet mask, default gateway, and DNS server addresses. These are the IP settings for the selected network connection.
- You can also view the IP settings for the "Internet Protocol Version 6 (TCP/IPv6)" by selecting it and clicking on the "Properties" button.
By following these steps, you will be able to view the IP settings for any network connection on your system.
Scroll down to Internet Protocol Version 4 (TCP/IPv4)
Once you have accessed the settings page, scroll down until you find the section labeled "Internet Protocol Version 4 (TCP/IPv4)". This section contains the IP settings that you need to configure.
The Internet Protocol Version 4 (TCP/IPv4) section is where you can manually set your IP address, subnet mask, default gateway, and DNS server addresses. These settings are essential for your device to communicate and connect to the internet properly.
Why is this section important?
The Internet Protocol Version 4 (TCP/IPv4) is the protocol used by most devices to connect to the internet. It is necessary to properly configure your IP settings to ensure a stable and reliable internet connection.
How to configure the IP settings
To configure the IP settings, click on the "Properties" button next to the Internet Protocol Version 4 (TCP/IPv4) section. A new window will appear, allowing you to set your IP address, subnet mask, default gateway, and DNS server settings.
You can choose to obtain the IP settings automatically from your network (using DHCP), or you can manually enter the IP address, subnet mask, default gateway, and DNS server addresses provided by your network administrator or Internet Service Provider (ISP).
Checking your IP settings
To confirm that your IP settings have been successfully configured, you can check your IP address, subnet mask, default gateway, and DNS server addresses by clicking on the "Details" or "Status" button in the Internet Protocol Version 4 (TCP/IPv4) properties window. This will display your current IP settings.
It is important to note that improperly configured IP settings can result in various network connectivity issues. If you are unsure about the correct IP settings for your network, it is recommended to consult with your network administrator or ISP for assistance.
Double-click on Internet Protocol Version 4 (TCP/IPv4)
To find your IP settings, you need to access the Internet Protocol Version 4 (TCP/IPv4) settings. This will allow you to view and modify your IP address, subnet mask, default gateway, and DNS server settings. Follow the step-by-step guide below to access these settings:
Step 1: Open Network Connections
First, click on the "Start" button in the bottom left corner of your screen. Then, click on "Control Panel". In the Control Panel window, select "Network and Internet" and then click on "Network and Sharing Center". From the Network and Sharing Center, click on "Change adapter settings" on the left-hand side of the window.
Step 2: Access TCP/IPv4 Properties
Next, locate the network adapter that you want to view or modify the IP settings for. Right-click on the adapter and select "Properties". In the properties window, scroll down and find "Internet Protocol Version 4 (TCP/IPv4)". Double-click on it to access the TCP/IPv4 properties.
| Property | Description |
|---|---|
| IP address | This is the unique address assigned to your device on the network. |
| Subnet mask | This determines the size of the network and divides it into subnets. |
| Default gateway | This is the IP address of the router that connects your device to the internet. |
| DNS server | This is the IP address of the server that translates domain names into IP addresses. |
Once you have accessed the TCP/IPv4 properties, you can view and modify the IP settings according to your needs. Remember to click "OK" to save any changes you make.
By following these steps, you can easily find and adjust your IP settings using the Internet Protocol Version 4 (TCP/IPv4) properties.
Step 4: Find IP Address
To find the IP address on your device, follow these steps:
- Open the "Settings" app on your device.
- Scroll down and tap on "Wi-Fi" or "Network & Internet".
- Depending on your device, tap on "Wi-Fi Settings", "Advanced", or a similar option.
- You should see a list of networks. Tap on the network you are currently connected to.
- A window will appear with the network details. Look for the "IP address" field.
- The IP address will be displayed next to the "IP address" or "IPv4 address" field.
- Make a note of the IP address for future reference.
Now that you have found the IP address, you can use it to troubleshoot network issues or to access devices on your network.
Check the Obtain an IP address automatically option
To find your IP settings on a Windows computer, you can check the "Obtain an IP address automatically" option. This will allow your computer to automatically obtain its IP address from a DHCP (Dynamic Host Configuration Protocol) server.
Follow these steps to check the Obtain an IP address automatically option:
- Open the Network and Sharing Center by right-clicking on the network icon in the system tray and selecting "Open Network and Sharing Center".
- In the Network and Sharing Center, click on the "Change adapter settings" option on the left-hand side.
- A new window will open showing all the network adapters on your computer. Right-click on the network adapter you are using and select "Properties".
- In the Properties window, scroll down and find the "Internet Protocol Version 4 (TCP/IPv4)" option. Select it and click on the "Properties" button.
- In the Internet Protocol Version 4 (TCP/IPv4) Properties window, make sure the "Obtain an IP address automatically" option is selected.
- Click on the "OK" button to save your changes.
By enabling the "Obtain an IP address automatically" option, you are allowing your computer to dynamically obtain an IP address whenever it connects to a network. This can be useful if you frequently switch between different networks or if you are troubleshooting network connectivity issues.
View the IP Address in the IPv4 Address field
To find your IP settings, you can view the IP address in the IPv4 Address field. This field displays the specific IP address assigned to your device by your network.
To access the IPv4 Address field, follow these steps:
- Open the network settings on your device.
- Locate the section or tab labeled "Network" or "Network Settings."
- Within the network settings, look for "IPv4 Address" or a similar label.
- Once you find the IPv4 Address field, you will see a series of numbers separated by periods (e.g., 192.168.0.1). This is your IP address.
By viewing the IP address in the IPv4 Address field, you can easily identify and record your device's assigned IP address. This information can be useful for troubleshooting network issues or configuring specific network settings.
Step 5: Find Subnet Mask
Once you have obtained your IP settings, the next step is to find the subnet mask. The subnet mask is a 32-bit number that defines a network's IP address range. It is used to separate the network portion from the host portion of an IP address.
To find the subnet mask, follow these steps:
- Open the Command Prompt on your computer.
- Type "ipconfig" and press Enter.
- Look for the "Subnet Mask" under the Ethernet or Wireless LAN adapter section. It will be displayed as a series of four numbers separated by periods, such as "255.255.255.0".
- Make a note of the subnet mask for future reference.
Once you have found the subnet mask, you can then use it to determine the IP address range for your network. The subnet mask, combined with your IP address, allows you to identify the network address, broadcast address, and available host addresses within your network.
Check the Obtain an IP address automatically option
In order to check your IP settings, you need to make sure that your computer is set to obtain an IP address automatically. This option allows your computer to automatically receive an IP address from a DHCP server, which is usually your router or modem.
Here are the steps to check the Obtain an IP address automatically option:
- Open the Control Panel by clicking on the Start menu and selecting Control Panel.
- Click on the Network and Internet option.
- Click on the Network and Sharing Center option.
- In the left sidebar, click on the Change adapter settings option.
- Right-click on the network adapter you are using (e.g., Ethernet or Wi-Fi) and select Properties from the context menu.
- In the Properties window, scroll down and double-click on the Internet Protocol Version 4 (TCP/IPv4) option.
- In the Internet Protocol Version 4 (TCP/IPv4) Properties window, make sure that the Obtain an IP address automatically option is selected.
- Click OK to save the changes.
By checking and enabling the Obtain an IP address automatically option, you ensure that your computer will receive the necessary IP settings from your router or modem, allowing you to connect to the internet and other devices on your network.
View the Subnet Mask in the Subnet Mask field
When you are trying to find the IP settings on your device, it is important to view the subnet mask in the subnet mask field. The subnet mask is a fundamental component of IP settings that helps determine the network and host portions of an IP address.
To view the subnet mask, follow these steps:
- Open the network settings on your device.
- Locate the IP settings or TCP/IP settings.
- Look for the subnet mask field.
- The subnet mask will be displayed in this field.
The subnet mask is usually represented as a series of numbers separated by periods, such as "255.255.255.0". It provides information about the number of bits used for the network portion and the host portion of an IP address.
Understanding the subnet mask is crucial for configuring IP settings correctly and ensuring proper network communication. Without the correct subnet mask, devices may not be able to communicate with each other or access the internet.
Step 6: Find Default Gateway
In order to find the default gateway for your IP settings, you can follow these simple steps:
- Open the Command Prompt on your computer. You can do this by pressing the Windows key + R, typing "cmd" in the Run dialog box, and then pressing Enter.
- In the Command Prompt, type "ipconfig" and press Enter. This will display a list of network adapters and their IP configurations. Look for the adapter that you are currently using (e.g., Ethernet or Wi-Fi).
- Next to your adapter, you will see a line labeled "Default Gateway". The IP address next to this line is your default gateway.
- Take note of the default gateway IP address. This is the IP address you will need to access your router or modem's settings.
Once you have found the default gateway IP address, you can use it to access your router or modem's settings page. Simply open your preferred web browser, enter the IP address into the address bar, and press Enter. This will take you to the router or modem's settings page where you can make any necessary changes to your network configuration.
Scroll down to Default Gateway
Once you have opened the IP settings page, you will need to find the Default Gateway. The Default Gateway is the IP address of your router, and it is used to connect your device to the internet.
To find the Default Gateway, scroll down on the IP settings page until you see a section labeled "Network Settings" or "Internet settings." This section may be located towards the bottom of the page.
Within the "Network Settings" or "Internet settings" section, look for a sub-section or label that says "Gateway" or "Default Gateway." This is where the IP address of your router will be displayed.
The Default Gateway IP address may be listed as a series of numbers separated by periods, such as 192.168.1.1. Make a note of this IP address as you will need it later to access your router's settings.
If you are having trouble finding the Default Gateway, refer to your device's user manual or contact your internet service provider for assistance.
View the Default Gateway in the Default Gateway field
When it comes to IP settings, one crucial piece of information is the default gateway. The default gateway represents the network node or router that serves as an access point to other networks. It acts as a bridge between the local network and external networks, allowing devices to communicate beyond their own network.
To view the default gateway, you need to access the IP settings of your device. Here's a step-by-step guide on how to find the default gateway:
Step 1: Open Network Settings
First, navigate to the "Settings" menu on your device. Depending on your operating system, this could be located in different places such as the control panel, system preferences, or in a dedicated "Network" section.
Step 2: Locate IP Settings
Once in the network settings, look for the section that displays your IP settings. This may be called "Network Information" or "TCP/IP" settings.
Note: The location and naming of this section may vary depending on your device and operating system.
Step 3: Find the Default Gateway
In the IP settings section, look for the field labeled "Default Gateway." This field should display a numerical value, which represents the IP address of your default gateway.
Example: If the default gateway is listed as 192.168.1.1, that means the IP address of your default gateway is 192.168.1.1.
By knowing the IP address of your default gateway, you can gain a deeper understanding of your network's configuration. This information can be particularly useful when troubleshooting network connectivity issues or configuring advanced network settings.
Step 7: Find DNS Server
After finding your IP settings, the next important step is to find the DNS server of your network. DNS stands for Domain Name System, and it is responsible for translating domain names into IP addresses.
To find the DNS server:
- Open the Start Menu on your computer and select "Control Panel".
- In the Control Panel, click on "Network and Internet" and then choose "Network and Sharing Center".
- On the left-hand side of the window, click on "Change adapter settings".
- Look for your active network connection, which should be labeled as "Connected" or "Network".
- Right-click on the active network connection and select "Properties".
- In the Properties window, scroll down and find the "Internet Protocol Version 4 (TCP/IPv4)" entry.
- Click on "Properties" again.
- In the new window, select the option that says "Use the following DNS server addresses".
- Here, you will find the preferred and alternate DNS server addresses.
Make a note of these addresses, as they are important for troubleshooting network issues or configuring your network connection.
Scroll down to DNS Servers
Once you have found your IP settings, it's time to scroll down and locate the DNS Servers section. This section will provide you with information about the DNS servers that your device is currently using to resolve domain names.
In order to find the DNS Servers section, you may need to scroll through a list of other IP settings such as IP address, subnet mask, and default gateway. Keep scrolling until you see the DNS Servers section or a similar heading.
The DNS Servers section will typically display two or more IP addresses separated by commas. These IP addresses represent the DNS servers that your device is using to translate domain names into IP addresses.
Why are DNS Servers important?
DNS Servers play a crucial role in internet connectivity as they are responsible for translating domain names into IP addresses. Whenever you enter a website address, the DNS server is queried to provide the corresponding IP address to establish a connection.
Having reliable DNS servers is important for smooth browsing experience as they can affect the speed and reliability of your internet connection. If you are experiencing slow internet or connection issues, you may want to consider changing your DNS servers to a more reliable and faster option.
Now that you have located the DNS Servers section, you can note down the IP addresses displayed. These addresses can be helpful if you need to troubleshoot network issues or if you want to change your DNS servers to improve your internet connection.
View the DNS Server addresses
To find the DNS Server addresses for your IP settings, follow these steps:
Step 1:
Click the Start button on your Windows taskbar, then click the gear icon to open the Settings app.
Step 2:
In the Settings app, click on "Network & Internet".
Step 3:
In the left sidebar, click on "Ethernet" if you are connected to a wired network, or click on "Wi-Fi" if you are connected to a wireless network.
Step 4:
Scroll down and click on the "Change adapter options" link.
Step 5:
Right-click on your network connection and select "Properties" from the context menu.
Step 6:
In the Properties window, scroll down and double-click on "Internet Protocol Version 4 (TCP/IPv4)".
Step 7:
In the Internet Protocol Version 4 (TCP/IPv4) Properties window, click on the "Use the following DNS server addresses" option.
Step 8:
| Preferred DNS server | Alternate DNS server |
|---|---|
| Enter the IP address of the preferred DNS server | Enter the IP address of the alternate DNS server |
Replace "Enter the IP address of the preferred DNS server" with the actual IP address of your preferred DNS server, and "Enter the IP address of the alternate DNS server" with the actual IP address of your alternate DNS server.
Step 9:
Click the "OK" button to save the DNS server addresses.
By following these steps, you can view and modify the DNS server addresses for your IP settings.
Question-answer:
What are IP settings?
IP settings refer to the configurations and information associated with an IP address on a computer network. This includes the IP address, subnet mask, default gateway, and DNS server settings.
What are DNS servers?
DNS stands for Domain Name System. DNS servers are like phone books for the internet. When you type in a website address (URL) into your web browser, the DNS server translates that human-readable address into the corresponding IP address of the server where the website is hosted. This allows your computer to connect to the correct server and display the website. Without DNS servers, we would have to remember and enter IP addresses for every website we want to visit.
